Experimental Investigation of Friction Stir Welded Aluminium Alloy AA6010 Joint
Authors
-
Department of Mechanical Engineering T.K.R. College of Engineering & Technology, Hyderabad – 500097 ,IN
G. Gopala Krishna
DOI:
https://doi.org/10.22486/iwj.v55i3.213075Keywords:
FSW, Al AA6010-T6 Alloy, Tensile Strength, Microhardness.Abstract
The features like low weight, low cost with moderate strength of aluminium (Al) alloys fascinate various modern industries to replace steels in different applications. The newly invented FSW (Friction Stir Welding) is well suited for Al alloys compared to other conventional welding processes. The solid-state type of this process overcomes melt-related defects when compared to fusion welding processes. It also overcomes many other defects like voids, cracks, and distortion and forms sound weld joint. FSW joints show a fine clear grain structure in the weld nugget area compared to the parent material. In this investigation, tensile properties and microhardness properties of Al AA6010-T6 alloy are studied.
References
Cabibo M, Meccia E, and Evangelista E (2003); TEM analysis of a friction stir welded butt joint of Al–Si–Mg alloys, Materials Chemistry and Physics, 81, p. 289.
Thomas WM, Threadgil PL and Nicholas ED (1999); Feasibility of friction stir welding, Science and Technology of Welding and Joining, 4, p.365.
Kulekci MK (2003); Mechanical properties of friction stir-welded joints of AlCu4SiMg aluminium alloy, Kovove Materialy, 41(2), p. 97.
Won-Bae Lee and Seung-Boo Jung (2004); The joint properties of copper by friction stir welding, Materials Letters, 58(6), p.1041.
Kulekci MK, Mendi F, Sevim I, and Basturk O (2005); Fracture toughness of friction stir-welded joints of AlCu4SiMg aluminium alloy, Metalurgija, 44(3), p.209.
Gopala Krishna G (2019); Experimental and numerical investigation of friction stir welded aluminium AA6351 alloy tensile properties, Indian Welding Journal, 52(3), pp.57-62.
Çam G, Ventzke V, Dos Santos JF, Koçak M, Jennequin G, and Gontier-Maurin P (1999); Characterisation of electron beam welded aluminium alloys, Science and Technology of Joining and Welding, 4, p.317.
Ericson M and Sandström R (2003); Influence of welding speed on the fatigue of friction stir welds and comparison with MIG and TIG, International Journal of Fatigue, 25, p.1379.
Uzun H, Donne CD, Argagnotto A, Ghidini T, and Gambaro C (2005); Friction stir welding of dissimilar Al 6013-T4 to X5CrNi18-10 stainless steel, Materials and Design, 26, p.41.
Saito N, Shigematsu I, Komaya T, Tamaki T, Yamauchi G, and Nakamura M (2003); Friction stir welding of dissimilar Al 6013-T4 to X5CrNi18-10 stainless steel, Journal of Materials Science Letters, 20, p. 1913.
Dickerson TL and Przydatek J (2003); Fatigue of friction stir welds in aluminium alloys that contain root flaws, International Journal of Fatigue, 25, p. 1399.
Prado RA, Murr LE, Soto KF, and McLure JC (2003); Self-optimization in tool wear for friction-stir welding of Al 6061+20% Al2O3 MMC, Materials Science and Engineering A, 349(1–2), p. 156.
Thomas WM and Nicholas ED (2003); Materials and Design, 4(6), p.269.
Murr LE, Liu G, McClure JC (1998); A TEM study of precipitation and related microstructures in friction stir welded 6061 aluminium, Journal of Materials Science, 33, pp. 1243-1251.
Bradley GR, James MN (2000); Geometry and microstructure of metal inert gas and friction stir welded aluminium alloy 5583-H321, Technical report, Mechanical Engineering and Manufacturing Research.
Aydin H, Bayram A, Uguz A, and Akay KS (2009); Tensile properties of friction stir welded joints of 2024 aluminum alloys in different heat-treated-state, Materials and Design, 30(6), pp.2211-2221.
Liu H, Fujii H, Maeda M, and Nogi K (2003); Tensile properties and fracture locations of friction-stir welded joints of 6061-T6 aluminum alloy. Journal of Materials Science Letters, 22(15), p.1061.
Yutako S Sato, Hideaki Takauchi, Seung Hwan C Park, Hiroyuki Kokawa (2005); Characteristics of the kissing bond in friction stir welded Al alloy 1050, Materials Science and Engineering A, 405, pp. 333-338.
Elangovan K, Balasubramanian V, Balu S (2009); Predicting tensile strength of friction stir welded AA6061 aluminium alloy joints by a mathematical model, Materials and Design, 30, pp. 188-193.
Lim S, Kim S, Lee C, and Kim S (2004); Tensile behavior of friction-stir-welded Al 6061-T651, Metallurgical and Materials Transactions A, 35(9), p.2829.
Moreira PMGP, de Oliveira FMF, de Castro PMST (2008); Fatigue behaviour of notched specimens of friction stir welded aluminium alloy 6063-T6, Journal of Materials Processing Technology, 207(1), pp. 283-292
Ren SR, Ma ZY, and Chen LQ (2007); Effect of welding parameters on tensile properties and fracture behaviour of friction stir welded Al-Mg-Si alloy, Scripta Materialia, 56, pp. 69-72.
