Study on Corrosion Behaviour of Dip Coating of Zinc on Mild Steel

Jump To References Section

Authors

  • Mohan Kumar
     Associate Professor, Department of Mechanical Engineering, Magalore Institute of Technology & Engineering, Karnataka ,IN
  • Vighnesh Nayak Ullal
     Senior Assistant Professor, Department of Mechanical Engineering, Magalore Institute of Technology & Engineering, Karnataka ,IN
  • Neelakantha V Londe
     Professor, Department of Mechanical Engineering, Magalore Institute of Technology & Engineering, Karnataka ,IN
  • Kaushik Shetty
     Production Engineer, Advance Cable Technology Pvt. Ltd., Bangalore ,IN
  • Gajanan M Naik
     Assistant Professor, Department of Mechanical Engineering, RVITM, Bangalore ,IN
  • Pranav Reddy K.
     Department of Mechanical Engineering, RVITM, Bangalore ,IN

DOI:

https://doi.org/10.18311/jmmf/2023/34732

Keywords:

Dip coating, Hardness, Immersion test, zinc, mild steel

Abstract

Steel is the most widely used structural material in engineering applications. It has high strength and elasticity. But the major problem with steel is that it corrodes when comes in contact with the atmosphere. To avoid corrosion many techniques have been developed over the years. Coating the surface of steel with a non-corrosive element is the most common method. However, the currently used methods are expensive and need very controlled environmental conditions. In this paper, the dip coating method for coating zinc on mild steel is studied. The hardness of the surface after coating in measured and immersion tests was conducted. It was observed that the zinc coating done through the dip coating process could reduce the corrosion. This proves that the dip coating is an effective method to apply coating on mild steel. This method also has the advantage of lesser expenses.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2023-09-12

How to Cite

Kumar, M., Ullal, V. N., Londe, N. V., Shetty, K., Naik, G. M., & Pranav Reddy K. (2023). Study on Corrosion Behaviour of Dip Coating of Zinc on Mild Steel. Journal of Mines, Metals and Fuels, 71(7), 908–911. https://doi.org/10.18311/jmmf/2023/34732

Issue

Volume 71, Issue 7, July 2023

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Crossref
Scopus
Google Scholar
Europe PMC

 

References

M.S. Noor Idoraa, M.M. Rahmanb, M. Ismailc, W.B. Wan Nikd, (2014): Effect of Zinc Coating Thickness on Corrosion Performance of Mild, Applied Mechanics and Materials, Vol. 554 (2014), 213-217.

Ojo Sunday Isaac Fayomi, Abimbola Patricia Idowu Popoola, Corrosion propagation challenges of mild steel in industrial operations and response to problem definition, Journal of Physics: Conference Series 1378 (2019) 022006.

Abioye O. P., Musa A. J.1, Loto C. A., Fayomi O. S. I., Gaiya G. P., (2019): Evaluation of Corrosive Behaviour of Zinc Composite Coating on Mild Steel for Marine Applications, Journal of Physics: Conference Series 1378 (2019) 042051.

Asmae El Fazazi, Moussa Ouakki, Mohamed Cherkaoui, (2019): Electrochemical deposition of Zinc on mild steel, Mediterranean Journal of Chemistry 2019, 8(1), 30-41.

Kanagalasara Vathsala, Thimmappa Venkatarangaiah Venkatesha, Beekanahalli Mokshanatha Praveen, Kudlur Onkarappa Nayana, (2010): Electrochemical Generation of Zn-Chitosan Composite Coating on Mild Steel and its Corrosion Studies, Engineering, 2, 580-584.

A. Amirudin, D. (1996): Thierry, Corrosion mechanisms of phosphated zinc layers on steel as substrates for automotive coatings, Progress in organic coating 28 (1996) 59-76.

Naveen Manhar Chavan, B Kiran, A Jyothirmayi, P Sudharshan Phani, and G Sundararajan, (2012): The Corrosion Behaviour of Cold Sprayed Zinc Coatings on Mild Steel Substrate, JTTEE5 22 (2012) 463–470.

S.N. Ezekiel, A.A. Ayoola, B. Durodola, O.A. Odunlami, A.V. Olawepo, (2022): Data on zinc phosphating of mild steel and its behaviour, Chemical Data Collections, 38 (2022) 100838.

L. Zhiwei, P. Haoping, X. Aijun, W. Changjun, K. Sibudjing, and W. Jianhua, Effect of ball-milling pretreatment on microstructure and corrosion of hot-dip galvanized coating, Materials Characterisation, 192(2022) 112177

S. Grandhi, V.S. Raja, and S. Parida (2021): Effect of manganese addition on the appearance, morphology, and corrosion resistance of hot-dip galvanized zinc coating, surface and coating technology, 421, 127377.

S.M.A. Shibli, R. Manu, and V. S. Dilimon, (2005): Effect of nickel-rich barrier layer on improvement of hot-dip zinc coating, Applied Surface Science, 245 (2005) 179-185.

Z. A. Hamid, A. A. Aal, H. B. Hassan, and A. Shaaban, (2010): Process and performance of hot dip zinc coatings containing ZnO and Ni–P under layers as barrier protection, Applied Surface Science, 256, 4166-4170.