Study on Heavy Machinery Utilizing the Most Recent Technologies for Excavation of Road Construction and Mining
Authors
-
Dr. D. Y. Patil Institute of Technology, Pimpri, Pune – 411018, Maharashtra ,IN
Namrata Saravade -
Savitribai Phule Pune University, formerly the University, Pune – 411007, Maharashtra ,INChetankumar Sedani
-
Dr. D. Y. Patil Institute of Technology, Pimpri, Pune – 411018, Maharashtra, India ,INKamalkishor Maniyar
-
Department of Mechanical Engineering, Guru Nanak Dev Engineering College, Bidar – 585403, Karnataka ,IND. Nandkishore
-
Dr. D. Y. Patil Institute of Technology, Pimpri, Pune – 411018, Maharashtra ,INSwapnil Deshmukh
-
Ajeenkya D. Y. Patil School of Engineering, Lohegaon, Pune – 412105, Maharashtra ,INShobha Rupanar
-
Dr. D. Y. Patil Institute of Technology, Pimpri, Pune – 411018, Maharashtra ,INBhagwat Gidhad
-
Dr. D. Y. Patil Institute of Technology, Pimpri, Pune – 411018, Maharashtra ,INSwagata Surase
DOI:
https://doi.org/10.18311/jmmf/2024/45327Keywords:
Capital and Running Expenses, Efficiency Evaluation, EnhancementAbstract
An essential component of the nation's overall development is its infrastructure development. India is regarded as the centre of the service sector, where infrastructure development is crucial. The main issue is what contractors usually have when choosing the best equipment. Given the circumstances, a contractor's inquiry would likely focus heavily on machinery and plants' upkeep and operating costs. Due to the substantial capital required for the purchase, rental, lease, and operation of the plant and equipment, it must be managed to maximize return on investment, and productivity, and minimize operating, maintenance, and repair costs. Therefore, careful planning and selection are necessary to ensure that the project is completed successfully. The kind of apparatus chosen typically relies on the properties of the material to be worked with. Using tracks or wheeled equipment; power or dragline excavator use a shovel, among other common inquiries that should be responded to by the construction equipment planner.
Downloads
Metrics
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Accepted 2024-08-29
Published 2024-09-17
References
Chinchore ND, Khare PR. Planning and selection of heavy construction equipment in civil engineering. Int J Eng Res Appl. 2014; 4(12) Part 1:29-31.
Kadam SR. Construction equipment fleet management: Case study of highway construction project. Int J Sci Res. 2015; 4(6):2558-64.
Biswas RK, Kesavan S. Detailed study on heavy equipment with its latest technologies and recommendations for its usage for different metro project. Int J Eng Res. 2016; 5(5):386-8.
Liu G, Luo F, Zeng G. The metro project construction safety risk managing system of GMC. Open J Safety Sci Technol. 2014; 4(1):36-41. https://doi.org/10.4236/ ojsst.2014.41005
Priyanka C. Optimization of Pune metro rail. Int J Eng Trends Technol. 2014; 17(7):297-304. https://doi.org/10.14445/22315381/IJETT-V17P261
Naskoudakis I, Petroutsatou K. A thematic review of main researches on construction equipment over the recent years. Procedia Engineering. 2016; 164:206-213. https://doi.org/10.1016/j.proeng.2016.11.611
Maniyar KG, Ingole DS. Multi response optimization of EDM process parameters for aluminium hybrid composites by GRA. Mater Today Proc. 2018; 5:1983643. https://doi.org/10.1016/j.matpr.2018.06.347
Maniyar KG, Ingole DS. Investigation of EDM process parameters for hybrid metal matrix composites. IOP Conf Ser Mater Sci Eng. 2018; 377:012204. https://doi.org/10.1088/1757-899X/377/1/012204
Maniyar KG, Ingole DS. Mathematical modeling and optimization of EDM process parameters for aluminium hybrid composites. Mater Today Proc. 2018; 5:27700-9. https://doi.org/10.1016/j.matpr.2018.10.004
Maniyar KG, Ingole DS. Influence of EDM control factors for aluminium hybrid Composites. Lect Notes Multidiscipl Indust Eng. 2018; 275-84. https://doi.org/10.1007/978-3-319-76276-0_27
Maniyar KG. An experimental analysis of aluminium hybrid metal matrix composites, Mater Today Proc. 2024. https://doi.org/10.1016/j.matpr.2024.01.021
Maniyar KG, Marode RV, Chikalthankar SB. Optimization of EDM process parameters on MRR and TWR of Tungsten Carbide by Taguchi Method. Int J Eng Adv Technol. 2016; 5:112-16. https://doi.org/10.1016/j.matpr.2024.01.021
Maniyar KG. Analysis of EDM process parameters on material removal rate of WC. 2nd Nat Conf Recent Inno Sci Eng. 2017; 5(9):37-9.
Maniyar KG, Agrawal SK, Ingole DS. Optimization of multiple performance characteristics in EDM: A critical literature review. Int J Innov Technol Explor Eng. 2016; 5(10):27-33.
Maniyar KG, Deore HV. Design and testing of carbon fiber composite material with comparative analysis. Int Res J Eng Tech. 2020; 7(8):1120-2.
Maniyar KG, Ingole DS. Current research development in machining of hybrid metal matrix composites: A review. Int J Recent Innov Trends Comput Commun. 2016; 4(7):150-4.
Pallavi Abhinandan Jadhav, Kamalkishor Maniyar, Evaluation and characterization of aluminum silicon carbide Metal Matrix Composites. AIP Conf Proc. 2024. https://doi.org/10.1063/5.0227945
Maniyar K, Jadhav P, Biradar R, Gawande J. An experimental study of process parameters for nano composites. NanoWorld J. 2024; 10(S1):S209-11.
Maniyar K, Jadhav P, Biradar R, Gawande J. Effect of nano-lubricants on journal bearing for performance enhancement. NanoWorld J. 2024; 10(S1):S206-8.
Maniyar K, Suhane S. Parametric analysis of electric discharge machining for nano composites. NanoWorld J. 2024; 10(S1):S63-5.
Maniyar K, Puri A, Pawar P, Patil V, Jadhav P, Patil G, et al. The comprehensive study for machining of metal matrix composites. AIP Conf Proc. 2024; 3196:040005– 5. https://doi.org/10.1063/5.0227955
Maniyar K, Warke P, Jadhav P, Waware S, Harsur S, Biradar R. An extensive study of mechanical properties and tribological characteristics for hybrid composites. AIP Conf Proc. 2024; 3203:030038-8. https://doi.org/10.1063/5.0224994
Maniyar K, Pawar P, Kolhe P, Ingale M, Patil P, Sarode G. The comprehensive study of synthesis and characterization of hybrid nano fluids. AIP Conf Proc. 2024; 3149: 030048. https://doi.org/10.1063/5.0224988
Vorozheikin I, Marusin A, Brylev I, Vinogradova V. Digital technologies and complexes for provision of vehicular traffic safety. Proceedings of the International Conference on Digital Technologies in Logistics and Infrastructure (ICDTLI 2019); 2019. https://doi.org/10.2991/icdtli-19.2019.67
Repin S, Zazykin A, Maksimov S. Improving operational safety of transport and handling machinery based on automobile chassis by forming fleets of machinery with specific level of reliability. Transp Res Proc. 2020; 50:582-90. https://doi.org/10.1016/j.trpro.2020.10.070
