Research on Rational Staggered Distance at Combined Mining Face of Contiguous Coal Seams with Thinner Top and Thicker Bottom and on Relations between Supports and Wall Rocks

For combined mining conditions of contiguous coal seams with thinner top and thicker bottom, the paper used overburden movement rules, stress superposition, and the theory of staggered distance as well to research on what influences the design of rational staggered distance at combined mining face and on relations between supports and wall rocks for the low seam face. The research results were: (1) through both overburden movement rules and stress superposition of coal seam roofs and floors, the paper computed staggered distances of contiguous coal seams, and the largest distance was determined as the correction value. The paper finally determined the rational staggered distance at combined mining face of contiguous coal seams to be 48 m. (2) In combination with the damage ranges of strata between rock layers and breakage intervals, the paper proposed an interbedded cantilever beam structure of “breakage blocks - loose blocks - damage blocks” that was formed on the overburden of the mined low seam face behind the stable-pressure area. (3) The paper analyzed the breakage height of the cantilever beam on the overburden and the roof control range. Computation results showed that the support resistance of the low seam face was 6000 KN.

View article page

Download PDF