Wear Behaviours of Al<sub>2</sub>O<sub>3</sub> Ceramic Tool when Machining Typical Workpiece Materials Based on Thermodynamic Characteristics
Cutting temperature always highly reaches over to 1000°C during high speed machining with Al2O3 ceramic tools. Diffusion wear is the main wear mechanisms at such high temperature. In this paper, the rules of diffusion wear for Al2O3 ceramic tools are studied based on thermodynamics. Dissolution concentrations in typical normal workpiece materials of ceramic tool material at different temperatures are then calculated. Diffusion reaction rules in high temperature are also analyzed using Gibbs free energy criterion, it is found that the theoretical results are uniform with the experimental data; and the diffusion solubility of Al2O3 ceramic tools is usually much smaller. The order of dissolution of Al2O3 ceramic tools in machining several typical normal workpieces is as follows: titanium> nickel> steel. At the same cutting condition, when machining cast iron and 35# steel, the wear performance of tools is very different and the wear mechanism should be researched more. The results will provide useful references for tool material design and selection.