Study on Process Mineralogy and Iron Separation Technology by Step Milling-Magnetic Separation
The main mineral in the iron ore from Hubei was poor magnetite, it has fine granularity and low iron grade. The content of total iron (TFe) in the original ore is from 12% to 20%, and the content of magnetic iron (MFe) was from 6% to 13%. Through the process mineralogy research, crushing product sieving, magnetic analysis and grinding granularity test, the iron ore products with an iron concentrate grade of 68.84% and an iron recovery rate of 72.87% can be obtained. In the study, it was found that the iron grade of the original ore and the magnetic iron (MFe) were 12.11% and 16.34% respectively. The iron grade of ore size of -0.074 mm was low in negative cumulative and positive cumulative analysis. The iron recovery rate was relatively low, i.e., 57.89%, this was due to that 19.89% of the ferric silicate in the sample of the raw ore cannot be recovered. Through dry magnetic separation, the iron grade can be raised to about 2.18%.