Modelling Substrate Analysis for Remanufacturing: Investigating the Plasma Beam Remelting Process (PBRP) in Surface Modification of Additively Manufactured SS316L

Additively manufactured components often exhibit inferior surface quality and mechanical anisotropy, necessitating additional post-production processing, which in turn raises both manufacturing costs and lead times. This study investigates the impact of modifying plasma power and scanning speed in the Plasma Beam Remelting Process (PBRP) on SS316L. This technique induces a rise in contact surface temperature, which subsequently alters the mechanical characteristics and surface roughness of the additively fabricated SS316L. Grain size refinement down to the sub-micron level was observed after PBRP. Finite Element Analysis (FEA) will be employed in this study to analyse temperature distribution and fluctuations in thermal zones using commercially available software. The interrelationship of various parameters will be explored to determine the optimal conditions necessary for effective surface modification. The temperature distribution in the x-direction was measured, and zonal area identification was conducted at varied scanning speeds. The effective area for reducing thermal stresses was projected to be the length of the Heat Treatment Effect Zone (HTEZ) as an extended zone. Plasma powers ranging from 300 to 340 W, coupled with scanning speeds between 63 and 90 mm/min, yielded the best results for processing. These preliminary findings indicate that the PBRP technique holds promising potential as a post-processing tool for modifying the surfaces of additively manufactured parts.

View article page

Download PDF