Effect of Tungsten Chromium Nickel (W-Cr-Ni) on the Abrasive Wear Behaviour of Al6061 Hybrid Composite
Strengthening of metals, towards approaching, inexorable climate, is a significant perspective in surface engineering. The Family of aluminium and its alloys, are more in demand. The uniqueness of the metal, lies, in its ability of being strengthier, simultaneously being lesser in weight, these parameters make it more suitable, in areas of Construction, Mining and Infrastructre associated equipments, wherein in, the objective of reducing, the static mass acting on the structure needed to be reduced. In automobiles, it is heat transfer, followed by less weight, which is the objective, get satisfied by these metals. In our present, endeavor, we have tried, to improve its defensive forefront, towards aggressive loss of surface in working, where in metal is set to abrade, in contact with a hard surface. The crucial components, in the extraction machinery equipment, undergo substantial surface loss in their working, the metals need to be strengthened with hard particles, which increases their defense against hard earth surface, wherein these machinery components rub towards each other. These fortified metals extend the service life of crucial elements. we are considering Al6061 as a Substrate, and to make its defense stronger, we are fortifying, the base alloy, with nickel, and chromium increments, added in tungsten environment. Our Hybrid alloy is realized, by heating the substrate, to its liquidous state, further, it is continuously stirred, to introduce reinforcements, in an incremental proportion starting from (Wt %) 2.5%, 5% and 7.5% respectively. The wear studies are conducted in three-body abrasion setup- ASTM G65 standard. The tests are conducted for two different loads and variable abrading distance varying from 700 to 2100m.The results are compared with as-cast Al6061 and reinforced composite. It has been observed that there is considerable reduction in volume loss visa-v- vis wear rate.