Structural and Modal Analysis of Chassis Frame Using Mild Steel
The frame, suspension, wheels, and brakes make up a two-chassis. wheeler's The two-overall wheeler's design is mostly determined by its chassis. The primary carrying systems of a vehicle are its chassis. The frame acts as a foundation on which components like the engine and transmission are attached. It can be made of alloy, steel, or aluminium. The goal of this effort is to create a chassis that must be tested for jerk motions within the vehicle. By making suggestions to the business, the problem of jerking and brake noise will be resolved. CATIA V5 was used to model the chassis, and ANSYS was used to analyse it in order to check for stress, displacement, and deformation. Results for 5mm and 10mm diameter thickness were obtained after the chassis model was examined using ANSYS.