Measuring the Efficiency of a Solar-Powered Dew Point Evaporative Cooling System: An Experimental Analysis
Dew-Point Evaporative Cooling (DPEC) is an efficient method for energy conservation, relevant to both energy supply and demand systems by enabling rapid heat and mass transfer. This research examines the intrinsic capacity of evaporative cooling to lower air temperatures without elevating humidity, a concept well-documented in prior investigations. The results demonstrate that the velocity in the wet channel substantially influences the efficiency of the cooling process. Data indicates that an increase in velocity within the wet channel correlates with a decrease in the temperature of the outgoing air, with a reduction of 2.4ºC to 3.2ºC noted when the velocity is elevated from 2.2 meters per second to 8.5 meters per second. Moreover, both wet bulb and dew point efficiencies enhance with increased wet channel velocities, a pattern consistently observed in both electrically driven systems and those utilising solar energy. It was observed that as relative humidity rises while the Dry Bulb Temperature (DBT) remains constant, the efficacy of both wet bulb and dew point cooling diminishes. The results demonstrate the efficacy of evaporative cooling in lowering air temperature without increasing moisture, while also emphasising the significance of wet channel velocity and inlet air conditions in optimising the process. The results obtained in the experimental analysis also demonstrate that the DPEC system shows a promising solution in the wet and dry regions due to its ability to operate without using energy-intensive compressors and harmful refrigerants. Major Findings: During the experimental analysis, it has been found that: 1. The DPEC system shows higher wet bulbs and dew points. 2. Effectiveness due to higher airflow velocity in the wet channel. 3. In the same way, the system is showing higher wet bulb and dew point effectiveness when there is lower relative humidity of incoming air.