Experimental Analysis on Thermal Performance of Lithium-ion Batteries during Charging using Pulsating Heat Pipe under Influence of Base Fluid and Graphene Nanoplatelates Nanofluids

Automakers have been forced to produce more environmental friendly automobiles due to the need to cut emissions and the use of fossil fuels. The Lithium-Ion Batteries (LIB) are most common source of energy for Electric Vehicles (EVs). The pursuit of a reliable and secure cooling solution for LIB thermal management is still ongoing. This article uses a Pulsating Heat Pipe (PHP) with a circular cross section to experimentally study lithium-ion batteries at various charging C-rate (2C, 1.5C and 1C) with different Filling Ratios (FR) of 40%, 50% and 60%. The water-ethanol mixture is chosen as the working fluid. The water-ethanol solution's Volume Ratio (VR) is 40:60, 50:50 and 60:40. A mass concentration of 0.1% to 1% of Graphene Nanoplatelates (GNP) nanofluid is introduced. According to experimental data, when compared to other filling ratios and volume ratios, the pulsating heat pipe with 40:60 volume ratio of water-ethanol solution and 50% filling ratio showed higher heat transfer performance during 1C charging. The concentration of 0.6% by mass of GNP further accelerates heat transfer and lowers the evaporator temperature to 44.60C when compared to a mixture of water and ethanol. The pulsating heat pipe with GNP nanofluids and a water and ethanol mixture is a viable choice for cooling LIB. Major Findings: The lithium-ion battery pack temperature reduced from a peak of 99.1°C to 48.4°C during 1C charging. Further enhancement with 0.6 wt% Graphene Nanoplatelets (GNP) nanofluids lowered the average evaporator temperature to 44.6°C, marking a 3.8°C improvement over the base fluid.

View article page

Download PDF