Dynamic Performance Evaluation of Precast T-Beam Structures under Seismic Loading
Reinforced Concrete Moment Resisting Frames (RCMRFs) are structural systems designed to effectively dissipate energy under seismic loading. In line with modern seismic design philosophy, the widely adopted capacity design approach emphasizes a “strong-column, weak-beam” configuration to promote ductility and a favorable collapse mechanism. When the flexural strength of the longitudinal beams governs the structural response, beam-column joints typically exhibit ductile behavior, with the joint panel zone remaining predominantly elastic. This beam-hinging failure mode is considered optimal, as it ensures significant global energy dissipation with minimal strength degradation at the joints. While many international design codes recommend maintaining a beam-to-column moment capacity ratio greater than one, discrepancies persist among these codes, and the Indian Standard currently lacks specific guidance on this critical aspect. Major Findings: The dynamic performance of precast T-beam structures under seismic loading reveals that precast models exhibit significantly lower total deformation compared to traditional Reinforced Concrete (RCC) structures, suggesting better structural stability. The stress levels, including equivalent stress, normal stress, and shear stress, are higher in precast models, with precast model 3 showing the highest resistance, indicating enhanced structural integrity. Additionally, the use of advanced dynamic analysis tools like ANSYS provides critical insights into the structural response, highlighting vulnerabilities and optimizing design for enhanced earthquake resilience.