Development of a Simplified Vortex Generator using CFD Technique for Optimization of Heat Transfer

Vortex Generators (VGs) are small flow control devices designed to create swirling motions within a fluid flow, thereby enhancing fluid mixing and improving heat transfer efficiency. Due to these advantages, VGs are widely applied in cooling systems and thermal management processes. This study numerically investigates the thermal performance of a trowel wing vortex generator (TWVG) installed within a rectangular duct. The primary objective is to evaluate the influence of TWVG geometrical parameters on heat transfer enhancement and flow resistance. Numerical simulations were performed using ANSYS Fluent 2022 R2, incorporating experimentally obtained boundary conditions at a Reynolds number of 5,000. The analysis focuses on key performance indicators, including the Nusselt number and friction factor, to comprehensively assess thermal and hydraulic performance. The study explores the effects of varying attack angles (α = 5°, 10°, and 15°) and vortex generator lengths (L = 50 mm, 75 mm, and 100 mm) over a Reynolds number range of 5,000 to 30,000. Results indicate that the geometrical configuration of the TWVG plays a crucial role in determining heat transfer enhancement and flow behaviour. The optimal configuration, providing the highest Performance Evaluation Criteria (PEC) value of 1.08, was achieved at an attack angle of 15° and a length of 100 mm. Furthermore, flow visualisation analyses were conducted to understand the interaction between flow structures and convective heat transfer mechanisms. Major Findings: The study presents detailed visualisations of Reynolds-averaged velocity fields, vorticity distributions, and surface temperature and Nusselt number profiles, offering valuable insights for the design of efficient thermal systems.

View article page

Download PDF