Measurement of Overall Heat Transfer Coefficient and Friction Factor in a Plate Fin Heat Exchanger with Nano MgO-based Transformer Oil
This experimental investigation is carried out to assess the thermal performance of nano Magnesium Oxide (MgO) based transformer oil in a plate-fin heat exchanger for applications in the electrical transformers manufacturing industry. The Overall Heat Transfer Coefficient (UHTC) and friction factor are determined experimentally using a unique test rig designed and developed for this investigation. Nano MgO-based transformer oil is prepared and characterised in the laboratory for its thermo-physical properties. While the viscosity and density of nanofluid are determined experimentally, the specific heat and thermal conductivity are estimated theoretically as functions of temperature. Experiments were conducted on nano MgObased transformer oil with different volume concentrations ranging from 0.002% to 0.008%. The mean bulk temperature of the nanofluid is varied from 30 C to 70 C with a flow rate from 1.2 L/min to 4.2 L/min. The Reynolds numbers for the flow are varied from 600 to 7100. The UHTC is determined and presented as a function of mean bulk temperature and mass flow rate. The results of UHTC are also presented as a function of volume concentration, taking mass flow rate and temperature as parameters. It is found that the UHTC, Convective Heat Transfer Coefficient (CHTC), improved by 53.43% and 13.79%, respectively. The friction factor decreased by 28.87% when the Reynolds number increased from 600 to 7100. In the present experiment, it is observed that the pumping power increased by 28.26% with respect to mass flow rate, while the pumping power decreased with an increase in temperature from 30 to 70 °C to an extent of 45 to 50 %. The novelty of the present investigations comes from two aspects: 1) the selection of nano MgO as a colloidal substance, and 2) the use of a plate-fin heat exchanger for testing the thermal performance of nano MgO-based transformer oils. Major Findings: From the present investigation, it is found that pumping power increases with the