Tribological Behaviour of Jute/Vinyl Ester Composites Impregnated with Alumina Filler
The present experimental studies focus on analysing the effect of abrasive particle size on the 3- body abrasive of composites of Vinyl Ester reinforced with jute fibre filled with alumina nano- filler particulates as the secondary reinforcement. The laminates of composites of VinylEster with discrepant compositions are prepared by varying alumina nano-filler in the weight proportion of 1% and 2% wt and varied jute fibres in the weight proportion of 10%, 20% and 30% wt. The specimens subjected to abrasive loading of 10 N, 20 N and 30 N are tested for 3-body abrasive wear according to ASTMG-65 at different abrasive particle sizes changing from106±10 and 212 ± 10 microns. The wear characteristics of jute–vinyl composites were investigated using a rubber wheel abrasive tester apparatus. It is supposed from the experimentation that an increase in wear resistance is obtained for composites of Vinyl Ester with an increase in the addition of alumina filler. It is perceived that a composite containing 30% Jute, 68% VinylEster and 2% Alumina filler results in maximum wear resistance compared to the rest of the composites. Given the above, this investigation attempts to study the effect of alumina as a filler material in jute–vinyl ester composite. Major Findings: The research emphasizes the utility of natural fibre-reinforced composites with ceramic fillers as a sustainable alternative for wear-resistant materials, aligning with eco-friendly and performance-driven industrial demands. The experimental findings may suggest suitability for applications like automotive parts, bearings, clutches, brake pads, panels and sliding components where wear resistance and lightweight materials are crucial.