Research on Damage Mechanism and Dynamic Characteristics of Abandoned Basalt at Different Heating Conditions
Physical and mechanical tests are required to explore the reuse value of abandoned rock to recycle excavated rock resources in mountainous areas. After mining excavation from Qinling, Shaanxi, China, the abandoned basalt was processed into standard samples. After being treated with different heating temperatures and heating times, the surface temperature, ultrasonic wave velocity, open porosity, Scanning Electron Microscope (SEM), impact resistance and the degree of fragments after-impact failure of the basalt samples were tested. With the increase of heating temperature and heating time, the temperature rise rate of basalt samples first increases and then decreases, the attenuation rate of ultrasonic wave velocity continually increases, and the difference of open porosity also gradually increases. The difference in mineral heat absorption in basalt samples is the main cause of structural damage cracking. The cracks mainly develop along the interface of heat-absorbing and heat-insensitive minerals, forming a fracture grid in the basalt, and eventually leading to the failure of the sample. With the rise of heating temperature at different impact pressures, the impact peak stress and impact peak strain of the basalt sample gradually decrease, and the curvature of the stress-strain curve gradually weakens. With the rise of heating temperature at different impact pressures, the lumpiness of basalt samples increases gradually after crushing, and the proportion of large-size fragments becomes larger and larger. The conclusions of this paper can provide an experimental basis and guiding significance for the recycling of abandoned rock resources.