CNC Hard Steel Turning Optimization: Taguchi and RSM
This research presents a comprehensive study on the optimization of CNC turning parameters for EN31 high carbon alloy steel, a widely used material in precision engineering applications. The primary objective was to maximize the Material Removal Rate (MRR) while simultaneously minimizing surface roughness and dimensional deviation, thus achieving a high-performance machining process. To achieve this, a hybrid approach combining the Taguchi Method and Response Surface Methodology (RSM) was employed to investigate the effects of cutting speed, feed rate, and depth of cut on key output responses. Experiments were designed using Taguchi’s orthogonal arrays to identify significant factors, followed by RSM-based modeling and optimization using ANOVA, regression analysis, and Signal to-Noise (S/N) ratio assessments. Contour and surface plots provided valuable visual insights into process behavior. The optimal machining conditions were determined to be a cutting speed of 650 m/min, a feed rate of 0.25 mm/rev, and a depth of cut of 0.575 mm, which resulted in superior Material Removal Rate (MRR), surface finish, and dimensional accuracy. Multi-response optimization using a desirability-based approach indicated a composite desirability score of 0.8499, confirming a well-balanced parameter combination. Validation experiments showed deviations of only 3-5 % from predicted values, with performance improvements of up to 18% in MRR, 12% in surface finish, and 10% in dimensional accuracy compared to baseline trials. This study demonstrates the effectiveness of statistical and empirical optimization techniques in enhancing CNC turning of hard steels. The proposed methodology and findings are highly applicable in industrial settings for improving machining efficiency, product quality, and process reliability, while also providing a foundation for future research in advanced manufacturing. Major Findings: Optimized CNC turning parameters for EN31 steel-650 m/min cutting speed, 0.25 mm