Investigating the Impact of Mould Insulation on Aluminium-Zinc Bimetallic Interfaces Produced by Centrifugal Casting
As the demand for bimetals in engineering, household, and commercial applications grows, advanced techniques like centrifugal casting are increasingly utilised to combine the strengths of two metals. This study investigates the influence of mould insulation and varying rotation speeds on Al-Zn bimetals' heat dissipation and quality produced by centrifugal casting. Al-Zn bimetallic specimens were created using a horizontal centrifugal casting machine under varying process parameters, including mould rotation speed and the presence or absence of insulation. The effects on solidification rates, mechanical properties (evaluated through hardness testing), and bimetal interface quality (analysed using SEM and microscopic imaging) were assessed. Results show that mould insulation significantly reduces heat loss, enhancing solidification control, improving mechanical properties, and minimising defects in the castings. Furthermore, higher rotation speeds were found to influence the bonding quality at the bimetal interface. This study underscores the importance of optimising both mould insulation and rotation speed for achieving superior Al-Zn bimetal performance and casting quality. Major Findings: The presence of thermal insulation around the rotating mould in the centrifugal casting process reduces the solidification rate of the melt and enhances the properties and surface finish of the cast produced.