Prediction and Optimisation of Two-Body Abrasive Wear on Chromium Coated Stainless Steel Using Statistical Technique

This study investigates the specific wear rate of chromium-coated steel specimens subjected to varying parameters such as coating thickness, disc rotation speed, applied load and sliding duration using a pin-on-disc setup. The specimens, prepared with chromium coatings of varied thickness ranging from 0 to 8µm, were tested under different conditions to evaluate their wear performance. Results indicate that the specific wear rate is significantly influenced by sliding duration and applied load, with contributions of 42.52% and 35.24%, respectively, while chromium coating thickness accounted for a contribution of 17.84%. The lowest specific wear rate observed was 0.000236 mm/N·m with a 2µm coating under optimal conditions of 1000 RPM, 40 N load, and 25m sliding duration, whereas the highest wear rate of 0.003819 mm/N·m was recorded with an 8 µm coating under less favourable conditions. The average error in the predictions made by the Response Surface Methodology (RSM) model was only 4.27%, confirming the model’s reliability in predicting wear rates. This study underscores the importance of optimising load, sliding duration, and coating thickness to enhance the wear resistance of chromium-coated steel, providing valuable insights for practical applications in material science and engineering. Major Findings: Key influencing factors like sliding duration and applied load, optimal wear performance, worst wear performance, model accuracy and practical implications.

View article page

Download PDF