Corrosion Resistance and Performance of Al2014-B<Sub>4</Sub>C Composites: A Comprehensive Study

The corrosion characteristics of Al2014-B4C Metal Matrix Composites (MMCs) are examined through weight measurement techniques and SEM studies. The specimens containing B4C contents between 3 % and 12 % were soaked in a 3.5 wt. % NaCl solution for durations from 20 to 120 hours. The investigation studied the corrosion rates through weight measurements of the test samples from before and after immersion, then compared pure Al2014 to its B4C-reinforced composites. Al2014 pure showed the highest corrosion speed, yet adding B4C reduced this value in the materials. The results indicated that a 12 % B4C composite displayed the minimum corrosion rate at every time, both before and after heat treatment. The overall corrosion rates declined after heat treatment for all alloys, in which the 12 % B4C composite showed improvement. SEM studies confirmed that B4C addition led to Al2014 alloys initiating superior corrosion protection by making the surfaces smoother and showed reduced signs of damage. The results exhibit that the addition of B4C to Al2014 alloys makes an excellent corrosion protection system, which heat treatment manages to improve even further. Major Findings: Addition of B4C to Al2014 reduces corrosion rates, with the 12% B4C composite showing the lowest rate. Heat treatment further improved corrosion resistance, and SEM analysis showed smoother surfaces and better protection.

View article page

Download PDF