Studies in the Corrosion of Aluminium Alloys in Dilute Hydrochloric Acid Solutions with Organic Inhibitors
The influence of various organic inhibllors (1 gm lo 2 gm/litre) on the corrosion of sonic commercial and experimental aluminium alloys in 0. IN and IN HCI solutions has been studied by weight loss and electrochemical methods. Amongst various inhibitors studied acridine appears to be an effective inhibitor for most of the commercial and experimental aluminium alloys in HCI solution, the inhibitor effiencies being over 60%. Some of the commercial aluminium alloys exhibit certain similar characteristics in the cathodic polarisation curves in 0.1 N and INHCl with different concentrations of acridine and also in its absence. The corrosion process is essentially under cathodic control in the absence of inhibitors for all the aluminium alloys studied and in the presence of inhibitors is under cathodic control in most of the cases, except a few being under mixed control. Several investigators have reported earlier on the effect of certain organic inhibitors on the corrosion of selected aluminium alloys in dilute hydrochloric acid. In this paper, similar study by weight loss and electrochemical measurements on a few commercial alloys and some experi mental alloys in 0.1I N and INHCI at 300C in the presence of I to 2 gm/litre of inhibitors like acridine, dextrin, gelatin among several others has been presented. Some of the experimental alloys investigetcd are also considered as of potential interest as cladding material for fuel elements in reactors.