Electroless Nickel Coatings on Copper Electrodes For Wear-and Corrosion - Resistance
THE paper repoits the use of electroless nickel coatjngs on copper electrodes used in MHD power generation programme for protection against erosive wear and corrosion duo to fused alkalies. The electrodes were coated from an acidic bath (pH 4.5) operating at temperatures around 75°C using aodjum hypophosphite as a reducing agent. These Ni*P a'loy coatings, were bright, pore-free and non-magnetic having uniform thickness (deposition rale 7-8 microns/hr) The adhesion of the coatings to copper substrate was excellent, bond strengths being as high as 1050 Kg/cm2 in as-plated co n d :tion and over 1400 Kg c m 2 for coatings vaccum baked at 240^C for 4 hrs. The microhardness of the coatings was seen to increase on vacuum anneal Ing ot elevated te m p e ra tu re s; the value being 800-850 Kg c m 2 for coating vacuum annealed at 400°C for halt-an-hour as compared to 500-550 Kg/cm2 for as-plated coating. This Increase in microhardness is because of precipitation hardening of nickel due to precipitated phosphides. Ni3 P.