Studies in Electrodeposition of Molybdenum for Solar Absorber Coatings
M OLYBDENUM was electrodeposited from an ammonium molybdate bath on to different substrates like aluminium and galvanised iron, using a nickel anode. The specim ens were normally heated to 2 5 0 'C for 10 minutes after electrodeposition, prior to their use for spectral reflectance measurements. The stability of the coating after thermal treatment was generally good. Four different compositions of electrolyte containing Nickel sulphate or Nickel ammonium sulphate in addition to ammonium molybdate were used. The effect of variables like (a) current density (b) zincating time (c) deposition time and (d) etching of the aluminium substrate in different media prior to zincaring, on the spectral characteristics has been studied. Scanning electron microscope observations on a few specimens show that zincated aluminium is a better substrate than galvanised iron.