Influence of 2-methyl-5-nitro-N-phenylmethylidene aniline (CP1 ) on Zn-Mn alloy plating from acid sulphate bath

The influence of condensation product (CP1) of 2-methyl-5-nitroaniline and salicylaldehyde on Zn-Mn alloy electrodeposited onto mild steel was studied in acidic sulphate bath. The bath constituents were optimized through Hull-cell experiments. The morphology and composition of the deposits depends on the current density, temperature, bath composition and additive concentration. The results showed that the additives modifies the structure and surface morphology of the deposit to a greater extent. The operating parameters such as pH, temperature and current density were also optimized. The current efficiency and throwing power were measured at different current densities. Polarization study was carriedout under galvastatic conditions. The consumption of brightener was determined in the laboratory scale. SEM photomicrographs revealed the fine-grained structure of the deposit. The deposited phases were analyzed by X-ray diffraction method. The IR spectrum of the scraped deposit confirmed the inclusion of addition agent into the deposit.

View article page

Download PDF