Effect Of Surface Patterning On Corrosion Behavior Of SS304 Stainless Steel
SS304 stainless steel is used as a structural/component material in aircrafts and ground vehicles. Corrosion degrades the performance of mechanical structures/components as it drastically reduces their operatinglifetimebycausingearlyfailures.Traditionally,coatingsandinhibitorsareusedtomitigatecorrosion. In recent years, surface patterning is being explored as an alternative route to alleviate corrosion. In this work, the wetting characteristics and corrosion behavior of microgroove patterned SS304 stainless steel surfaces are investigated in order to understand the relationship between these two properties. Groove shaped patterns were created at micro-scale on the steel surface with varying ridge and channel widths by photolithographic technique. Structural features of the patterned surfaces were characterized using 3D optical profilometry. The wettingbehaviorof thetestsampleswascharacterizedbythesessiledropmethod. Thecorrosionbehaviorofthe test samples was studied using an electrochemical test setup with saline water as the corrosive media. Parameters such as corrosion potential, current density and polarization resistance were obtained from TAFEL plot to quantify the corrosion rate. Results showed that the microgroove patterned surfaces were hydrophobic and had anisotropic wetting characteristics. The corrosion rates of the patterned surfaces were significantly lower when compared to that of the flat steel surface. A direct relationship was observed between the wetting characteristics and corrosion behavior of the test samples. The improvement in corrosion resistance shown by the patterned surfaces is explained in terms of their wettingcharacteristics.