Mechanism Of Fatigue Crack Initiation Of 316N Weldment Under The Influence E Of Cyclic Stress Amplitude In A Corrosive Environment

Total fatigue life of the material consists of initiation and propagation of fatigue cracks. Several approaches are available in literature for prediction of fatigue life and crack growth phenomena. In this connection an attempts was made to understand and estimate the fatigue initiation time using the compliance based approach. The corrosion fatigue behavior of 316N weldments was investigated with a view to know the effect of the mean stress on the damage characteristics. It was found that the S-N curve of the fatigue life vs. the mean stress showed a specific bilinear Basquin relationship. The process of formation, blunting and resharpening of crack delays the crack propagation at low stress amplitudes whereas, at high stress amplitudes the barriers to dislocation motion is overcome thereby crack initiation becomes easier. At low stress amplitude, thedeformation microstructure consists mainlyofplanarslipdislocationstructureandathighstress amplitudes, planar multiple slip dislocations and deformation induced persistant luder’s band (PLBs) govern the cyclic behavior. A correlation between microstructural changes and the corresponding susceptibility of the 316N SS weldmentin as-welded conditiontowards environmental crackinginboiling acidifiedaqueoussolutionhas been presented.

View article page

Download PDF