A Novel Electro-Cathodic Deposition Process For Development Of Polymer Nano-Composites For Electrical And Electronic Application – An Advaced Process For Future
Polymer Nano-composites (PNCs), by virtue of their functional applications in Engineering and Industry, have been the subject of intense research [1-3] for more than a decade with focus on enhancing their physico-mechanical, thermal and electrical properties. However, currently these Nanocomposites are prepared using the conventional methodology that involves mechanical shear mixing and ultrasonication of nano- particulate fillers into the liquid polymer matrix which poses the limitation of filler loading levels due to resultant viscosity build-up. This limitation remains a serious bottleneck in the presentday conventional technology of obtaining PNCs. In this article, the authors have presented the development of a novel and eco-friendly process of Electro- Cathodic Deposition (ECD) of an electro-activated polymer matrix, typically a polyepoxide, together with nano-particulates oflayered-silicate nanoclays such as Montmorillonite (MMT), on to a metallic substrate for synthesis of a new class of Electrodeposited Polymer Nano-Composites (EPNC). Such EPNCs are shown [4, 5] to have far superior functional properties as compared to their conventionally prepared counterparts, and are suitable for function specific applications such as dielectrics, anti-corrosion coatings and electrical insulation, intended for electrical, and electronics engineering industry. The advantages of this novel technique are many folds like inherent short processing times, simplicity, and more importantly, obtaining uniformly thick/thin coatings of controlled composition on the substrates, metallic or a composite, of any shape or geometry. The authors present some highlight of the initial results obtained using this ECD process based on electro- activated epoxy polymer and a layered silicate nanoclay (Montmorillonite) as a composite system on conventional metallic substrate. The results showed significant improvement in dielectric strength and volume resistivity (2 fold and 10 fold respectively