Anodic Behaviour Of Platinum Electode In CaCl2 -(0-3)wt% CaO Melts
Solid metal oxides, configured as cathode in an electro-reduction cell, can be chemically reduced to metals by lithium or calcium metal electro-generated on it by molten salt electrolysis with graphite or platinum anode. Molten CaCl2 -CaO system at ~900 oC is a suitable electrolyte medium for producing calcium metal with platinum anode. In the context of electrochemical reduction of solid ThO2 in CaCl2 - CaO melt, electrochemical behaviour of platinum electrode in molten CaCl2 -xwt% CaO (x = 0, 0.5, 1, 2, 3) was studied with cyclic voltammetry at 900 oC. In pure CaCl2 melt, the limiting anodic reaction occurred at 0.99 V w.r.t Ni/NiO reference electrode and it is inferred that a mixed reaction of platinum dissolution and chlorine gas evolution occurred at the potential. In CaCl2 - 0.5wt% CaO melt, the onset potential for oxygen evolution on platinum was found to be at 0.77 V and that for platinum dissolution and chlorine evolution at 1.02 V. The onset potential for oxygen evolution in CaCl2 -1wt% CaO melt and platinum dissolution and chlorine evolution was found to be shifted to more anodic potential of 1.15 V. As the concentration of CaO in the melt was increased from 1wt% to 3wt%, the potential window of oxygen evolution increased from 0.47 V to 0.98 V and correspondingly, the potential of platinum dissolution and chlorine evolution was also shifted from 1.15 V to 1.66 V. Potentiostatic electrolysis experiments carried out in the oxygen evolution potential window of CaCl2 -1wt% CaO melt did not indicate formation of platinum oxide, but showed small mass loss of platinum. The diffusion coefficient of O2- ions for oxygen evolution reaction was determined to be 2.4 ± 0.003 x 10-4 cm2 s - 1 at 900 oC. The results of the study showed that platinum can be used as anode in the electrochemical reduction of ThO2 in CaCl2 -1wt% CaO melt with minimal consumption in the anodic processes.