Enhanced Surface Protection By Electrophoretically Painted Epoxy Nanocomposite (EPP-ENC) Coatings
The article highlights important features of a novel Electrophoretic painting (EPP) process of coating Epoxy Nano-composite (ENC) from an aqueous dispersion of an electro-activated epoxy polymer and a nano-clay (NC) like Montmorillonite (MMT), under the influence of DC electric field. A commercial grade bifunctional epoxy resin is transformed into a hydrophilic quaternary ammonium form through controlled amination and neutralisation. ENC coatings were electro-phoretically painted (EPP) on stainless steel and aluminium as cathode, followed by suitable curing. Their characterisation has shown significant enhancement in certain key properties with increase in MMT content up to 6% by weight of the polymer, viz. Cross Hatch Adhesion (CHA) showing Index 5B for no peeling, approx. 10 fold rise in electrical volume resistivity, approx. 2 fold rise in dielectric strength and enhanced corrosion resistance. Surface Protection Effectiveness (SPE) was studied through measurement of loss in adhesion, coating weight and deterioration in dielectric properties of EPP-ENC coatings after exposure to 3.5% Salt Fog Test (SFT) in the corrosion test chamber for 15, 30 and 45 days as per the ASTM D-3359-87 method with respect to original values obtained before exposure to Salt Fog test. Values were also compared with those of the Conventionally brush-painted Epoxy Nanocomposite (CBP-ENC) coatings having same Epoxy-MMT composition and subjected to same exposure to SFT. EPP-ENC coatings having MMT content at 6-8% have shown the best corrosion resistance or SPE based on retention of Cross Hatch Adhesion (CHA), Coating weight and electrical volume resistivity and demonstrated using graphs.