Electro-deposited Multi-layer Metallic Coatings to Facilitate Brazing for Aerospace Applications
Brazing is a widely used metal joining process, in which two or more metal parts are joined together by melting of brazing alloy. Wide variety of alloys are being used as filler metals for brazing, generally in the form of foil, rod, powder, paste, etc. This paper describes the study conducted to establish a technology to use electro-deposited multi-layer metallic coatings of copper and silver to replace copper-silver alloy foils in brazing of dissimilar metals, viz. stainless steel (SS) and copper alloy. This technology is very useful for joining parts of intricate geometry with in-built cooling channels and also for automated furnace brazing, wherein normally foils are placed on the mating surfaces beforehand, for brazing purpose. In this study, brazing of SS to copper alloy was attempted using electroplated multi-layers of nickel (3-7µm) and copper (22-30µm) on SS and copper (20-27µm) and silver (12- 18µm) on copper alloy. The reaction that takes place between these layers during brazing is expected to result in the formation of in-situ braze metal. For establishing this technology, extensive coating and brazing trials were carried out on flat specimen for microscopy and flat lap-shear coupons. After coating and brazing, flat specimen used for microscopy and lap-shear specimens were tested for bond strength evaluation and the quality of the braze-joint. The paper describes these functional tests along with the standard qualification tests conducted to ascertain the quality of the electrodeposited coatings.