Effect of current density on the properties of electrodeposited Ni-mullite composite coatings

In recent years there is a great demand for the development of electrodeposited Ni-composite coatings due to their improved corrosion and wear resistance. The properties of the electrodeposited coatings are dictated by the nature and amount of the distributed particles, the particle size and its distribution, the applied current density, the magnetic stirrer speed, etc. In the present study, the less explored mullite particles are chosen as the distributive phase and the effect of applied current density on the microhardness, corrosion and wear resistant properties of the coating is studied. The mullite powder is obtained by ball milling the commercial alumina and silica powders. The microhardness, corrosion resistance and wear resistance of the coatings are evaluated. The Ni-mullite composite coating electrodeposited at a current density of 3.1A/dm2 exhibits improved corrosion resistance with a corrosion rate of 1.1cm/yr . Ni-mullite coatings showed a lower coefficient of friction (0.4) and higher wear loss when compared to plain nickel coating.

View article page

Download PDF