Electrodeposition of Ni-V Alloy Coatings for Better Corrosion Protection

This study reports the electrodeposition of bright and uniform Ni–V alloy coatings from a newly formulated tartrate–sulfate bath containing glycerol as an additive. Deposition parameters were optimised using the Hull cell method over a current density range of 1.0-6.0 A dm-2. Electrochemical behaviour in 3.5% NaCl solution was evaluated by potentiodynamic polarisation and Electrochemical Impedance Spectroscopy (EIS). Results revealed that Ni content in the deposit decreased, while V content increased, with increasing current density, indicating a regular type of codeposition where Ni, being more noble, deposits preferentially. Higher V content was associated with reduced corrosion resistance, with the coating obtained at 1.0 Adm-2 exhibiting the lowest corrosion rate. Cyclic Voltammetry (CV) study demonstrated diffusion-controlled deposition, and the presence of glycerol significantly shifted the deposition potential while improving coating brightness. X-Ray Diffraction (XRD) confirmed the formation of a single-phase solid solution of Ni and V across all current densities. The influence of bath composition and current density on coating structure, morphology, and corrosion performance is discussed here.

View article page

Download PDF