Performance Evaluation of 2 kW / 1 kWh Vanadium Redox Flow Battery Enabled by an Interpenetrating Cation Exchange Membrane

This study focused on a recent demonstration of a vanadium redox flow battery using an Interpenetrating Cation Exchange Membrane (IP-CEM) at a 2-kW scale. Battery testing in the 2-kW VRFB prototype stack, having a series of 24 cells with an area of 1500 cm2, demonstrated stable discharge capacities (~30 Ah), and maximum power density (2.5 W cm-2) at 100 mA cm-2 with an energy efficiency of 95%. IP-CEMs synthesised using high and low-density polyethene (HDPE/ LDPE) copolymerization followed by sulfonation, yielded an enhanced proton conductivity (12.56 mS cm-1), but registered high-water uptake (27.56%). Electrochemical characterisation revealed that the IP-CEM membrane exhibited higher ion- exchange capacity (1.78 meq g-1), ion selectivity (52.98 � 103 S min cm-3) and a lower vanadium ion permeability (1.94 � 10-6 cm2 min-1) than the commercial Nafion-117 membrane. Further, the post-operation autopsy of membranes showed their elemental composition and structure remain unchanged after prolonged cycling. These results indicate that the IP- CEM membrane offers an improved capacity retention and is cost-effective than Nafion�, making it a durable candidate for future grid-scale VRFB applications.

View article page

Download PDF