Investigations into a Heteropoly Acid and Redox Indicator Flow Battery
We present here the performance of a redox flow battery with a tungsten based heteropoly acid as an anolyte and an iron based redox indicator as the catholyte. While the phosphotungstate anion is capable of multi-electron transfer (higher capacity), the iron phenanthroline complex has high enough formal potential (high cell voltage). Thus, a combination of these two is especially appealing for application in a redox flow battery. Both these compounds have good solubility and electrochemical data suggests that the individual reactions are kinetically fast. In addition to routine electrochemical techniques such as cyclic voltammetry in both stationary and rotating electrodes, full redox flow cell studies have also been performed at several different concentration ratios. The maximum discharge current of 160 mA cm-2 and maximum power density of 32 mW cm-2 has been obtained from the i-V polarization curve. Meanwhile, the charge or discharge experiments suggest an average Coulombic efficiency of 89%, amaximum specific capacity of 1587 mAh l-1 during discharge at 50 mA cm-2 and volumetric energy density of ~1.94 Wh l-1. Interestingly, the cell data suggests better performance at low concentration as far as maximum power density is concerned. Moreover, the crossover of ions across the membrane is minuscule.