Hybrid Enhancement of Solar PV Efficiency using Thermoelectric Generators and Ultra-Low Voltage Boost Converter
Solar Photovoltaic (PV) systems are among the most widely deployed renewable energy technologies; however, their efficiency is significantly limited due to operating temperature rise and thermal losses. A considerable share of incident solar radiation is dissipated as heat, which reduces the power conversion efficiency of PV modules. This work investigates the analysis of a 320 W polycrystalline solar PV module consisting of 72 cells (Voc = 40 V, Isc = 9 A) and explores the integration of a thermoelectric generator (TEG, model TEC-12706) attached to the rear surface to harvest excess heat. The electrical behaviour of both PV and TEG is modelled using standard equations, and performance parameters are evaluated. Since the output of TEG modules is in the millivolt and microampere range, a boost converter is proposed to enhance the voltage for practical use. The combined PV-TEG approach demonstrates the potential for improved system efficiency by recovering excess heat in addition to conventional PV output. Since TEGs typically generate very low output voltages, a boost converter is developed and simulated using MATLAB/Simulink to elevate the voltage from as low as 0.5V to usable levels, reaching up to 40V for standard load applications.