Thermal Modeling on Powder Mixed EDM of HCHCR Steel Using Taguchi Based GRA
This research work investigates the simultaneous optimization of three critical quality characteristics surface roughness, machining time, and thermal behavior in the Powder Mixed Electrical Discharge Machining (PMEDM) of HCHCR die steel using a constant mass of graphite powder blended in the dielectric fluid. The Taguchi method combined with Grey Relational Analysis (GRA) was employed to evaluate the influence of key process parameters: pulse-on time, pulse-off time, and current. PMEDM is the unique process for non-contact machining best suitable for very high hardened material. Highly stressed cutting and drawing and deep drawing tools can be manufactured with the help of HCHCR, on that situation fine finishing is inevitable. The surface quality of the PMEDM significantly improved during experimental observation and machining time also reduced. The study identified that setting the pulse-on time to 8 ?s, pulse-off time to 4 ?s, and current to 10 A achieved the minimal surface roughness in the PMEDM process. Furthermore, a comprehensive thermal analysis was conducted using ANSYS 20 to examine the effects of heat flux and static thermal stress distribution during machining. The addition of graphite powder minimally affected total heat flux, and the thermal performance remained largely consistent with that of a pure copper electrode observed during experimentation. The thermal model confirmed that directional heat flux and thermal stresses are crucial for understanding electrode workpiece interaction and achieving stable machining performance in PMEDM. Major Findings: The study found that adding graphite powder in PMEDM improves surface finish and reduces machining time for HCHCR die steel. Optimal results were achieved with a pulse-on time of 8 ?s, pulse-off time of 4 ?s, and current of 10 A. Thermal analysis showed minimal impact on heat flux, and directional heat flux and thermal stresses were identified as key to stable machining performance.