Sustainable 3D Printing: Investigation on the Mechanical Properties of Bamboo-Reinforced PLA Biocomposites Filaments

Fused Deposition Modeling (FDM) is the most promising additive manufacturing process used for producing thermoplastic parts for applications where reduced material waste, less cost and material transformation easiness are crucial factors. Because pure thermoplastics have noticeably low mechanical capabilities, it is necessary to enhance the mechanical characteristics of thermoplastic parts made with FDM. The objective is to analyze the mechanical characteristics of a PLA strengthened with bamboo powder through several standardized mechanical tests, establishing its suitability for applications in 3D printing and other sectors that require biodegradable and eco-friendly materials. The bamboo reinforced PLA demonstrated the improved hardness and modulus of elasticity in comparison to pure PLA samples. Pure PLA samples exhibit higher tensile strength, higher flexural strength, higher yield strength and low frictional force in comparison to bamboo composite PLA samples. The samples having line infill pattern and 100% fill density demonstrated maximum yield strength and tensile strength for both PLA and bamboo PLA. Therefore, the bamboo PLA composite can be used in applications requiring higher hardness and durability. The findings of this study advance the usage of bio composite materials in 3D printing, providing both environmental and performance benefits. Major Findings: PLA-bamboo composites showed greater tensile modulus and hardness compared to pure PLA, signifying enhanced stiffness and surface resistance. Nonetheless, the performance of pure PLA in terms of tensile, flexural, and yield strengths, along with its lower friction, was superior. With a line infill pattern and an infill density of 100%, both materials reached their maximum mechanical properties.

View article page

Download PDF