Effects of Shot Peening Duration on Mechanical and Corrosion Behavior of Laser Powder Bed Fusion 316L Stainless Steel
Laser Powder Bed Fusion (LPBF) in Additive Manufacturing (AM) has become a transformative method for creating metallic parts, especially Stainless Steel (SS) 316L shows compatibility. Since SS316L, with its constituent elements, offers excellent mechanical strength, biocompatibility, and corrosion resistance, it is suitable for several applications. Nevertheless, enhancements in mechanical strength and corrosion resistance are essential for its application in biomedical fields. Shot Peening (SP), a Severe Plastic Deformation (SPD) technique, was used to enhance these properties on Unpeened (UP) and Shot-Peened (SPed) samples with exposure times of 6 (SP1), 8 (SP2), and 10 minutes (SP3). The characterized results indicate that the contact angles increased hydrophilicity for SPed samples in PBS and Deionized water, maintaining the trend and indicating higher wettability compared to the UP sample. Surface roughness values gradually decreased from SP1 (8.27 ?m) to SP3 (7.6 ?m) compared to the UP sample (10.93 ?m). The micro-hardness increased after SP; among all the samples, the maximum value was exhibited by SP2 (395.7 � 5.8 Hv). The tensile properties, such as YTS and UTS, are increased for SPed samples of SP1 and SP2, but slightly decreased for SP3 compared to the UP sample. In contrast, the percentage elongation gradually reduced for the SPed samples compared to the UP, except for SP1. The corrosion tests conducted in a 0.5 M NaCl environment using PDP and EIS methods showed that the SPed samples exhibited lower Icorr and higher Ecorr. Consequently, the corrosion resistance varies in the order of SP3 > SP2 > SP1 > UP. Hence, the corrosion resistance of LPBF SS316L is not influenced by a single parameter, but it is controlled by the combined effects of surface properties imparted by SP. Major Findings: SP played a crucial role in the varying durations of the mechanical properties and corrosion behavior of LPBF 316L, along with the distinct surface morphological featu