Electroless Nickel Coatings for Enhanced Wear Resistance of Ti-6Al-4V Alloys
Titanium and its alloys are mainly used for strategic applications such as aircraft and space programs due to their high strengthto- lightweight ratio. A suitable surface treatment process is necessary to further enhance its mechanical and tribological properties. In the present study, an attempt has been made to deposit a uniform and adherent Electroless Nickel (EN) coating on difficult-to-plate titanium alloys such as Ti6Al4V substrates using RoHS compliant EN plating bath. Process parameters were optimised to obtain a thickness of about 24 μm at a pH 5.1 at a temperature of 87°C for 2 h. Deposits were characterised for their morphology and composition using a field emission scanning electron microscope and energy dispersive X-ray analyser, respectively. The as-plated coating exhibited nodular morphology with about 8 wt.% phosphorus codeposited in the Ni matrix. X-Ray Diffraction (XRD) studies were carried out on both as-plated and heat-treated (400°C, 1 h) Ni-P deposits. A thermal quench test was carried out on an EN-coated Ti alloy substrate to assess coating adhesion. There were no signs of blisters or peeling of the coating, indicating excellent adhesion to the substrate. Microhardness measurements were made on both asplated and heat-treated coatings. Heat-treated coatings exhibited a higher microhardness of 980 HV50 gf compared to 550 HV50 gf microhardness in the as-plated coating. The tribological properties of as-plated and heat-treated coatings were determined. The heat-treated coatings exhibited 40% reduction in the coefficient of friction compared to as-plated coatings with improved wear performance. The above studies showed that the appropriate pre-treatment followed resulted in obtaining an adherent and uniform electroless Ni-P coating on difficult to plate Ti-6Al-4V alloy using RoHS compliant electroless nickel bath.