Experimental Evaluation on Radio Interference Voltage Emission of HVDC Converter Valve Station Before and After Refurbishment
Radio Interference Voltage (RIV) emission from High-Voltage Direct Current (HVDC) converter stations is a critical Electromagnetic Compatibility (EMC) concern due to its potential impact on nearby communication systems and sensitive electronic equipment. Over long-term operation, ageing of converter valves, degradation of shielding, and deterioration of high-voltage hardware can lead to increased RIV levels, necessitating refurbishment. This paper presents a comprehensive experimental evaluation of RIV emissions from a back-to-back HVDC converter station before and after refurbishment. Insitu radiated interference measurements were conducted over a wide frequency range from 30 kHz to 1 GHz at identical locations and under comparable operating conditions, in accordance with IEC CISPR 18-2 and CIGRE Technical Brochure 391. The refurbishment included replacement of electrically triggered thyristor valves with light-triggered thyristor valves, enhancement of valve hall electromagnetic shielding, and renewal of associated high-voltage and grounding components. Comparative analysis of measured spectra shows a clear reduction in RIV emission levels after refurbishment, particularly in the lower frequency range below 1 MHz, with reductions of up to approximately 10 dBμV and smoother spectral characteristics. Measurements along the transmission line and within the performance perimeter further confirm reduced impulsive components and improved EMC behaviour. The results demonstrate the effectiveness of refurbishment measures in mitigating both conducted and radiated interference and provide practical validation and guidance for EMC-oriented refurbishment and compliance assessment of ageing HVDC converter stations.