Microstructural and Thermal Behavior of Zn-Rich Byproducts from the Iron and Steel Industry
In an integrated steel plant, byproducts such as blast furnace sludge, steelmaking sludge, and flue dust are reused for agglomeration processes including sinter and pellet production. However, these materials exhibit diverse chemical compositions, particularly high zinc concentrations which limit their utilization. This study investigates the dilatometric and morphological characterization at elevated temperature for selected byproduct samples from an integrated plant. Particle size analysis showed a mean diameter exceeding 100 μm, with 90% passing 500 μm size. Phase analysis revealed the presence of hematite, magnetite, wustite, quartz, and zincite. Microscopy further validated irregular morphologies and zinc distribution. Dilatometry indicated sintering temperatures and melting behaviors ranging from 1000°C to 1500°C, alongside volumetric and area changes. Bulk TGA experiments up to 1300 °C showed continuous mass loss carbon combustion and CO‑induced reduction of iron oxides, enabling near‑complete zinc volatilization. Post‑roasting XRD confirmed reduction pathways and zinc removal in carbon‑rich samples. This study highlights characterization, morphology, thermal behavior, high temperature zinc phase behavior and phase transformations as well as the suitability of byproducts in agglomeration processes.