Properties of Electrodeposited Ni Composite Coating Containing Synthesised and Washed ZnAl<sub>2</sub>O<sub>4</sub> Powder
In this study, the effect of particle pretreatment on the properties of electrodeposited Ni-ZnAl 2 O 4 composite coating is investigated. When attempts were made to codeposit as synthesised ZnAl 2 O 4 particles from the solution combustion method from a nickel sulfamate bath, a black-coloured solar-selective coating was obtained. The composition of the black coating indicated the formation of a Ni-Zn alloy coating, and no particles were incorporated into the coating and did not result in the formation of a Ni-ZnAl 2 O 4 composite coating. This was attributed to the presence of zinc salt on the powders, as the powders were neither calcined nor washed after the solution combustion reaction. However, after using the ZnAl 2 O 4 powder that was washed and dried, Ni-ZnAl 2 O 4 composite coatings were achieved. The Ni-ZnAl 2 O 4 coatings were obtained at various applied current densities. The coating electrodeposited at 0.75A/dm 2 showed a microhardness of 429 KHN. In general, microhardness values decreased with increasing applied current density. The variation of corrosion resistance of the coatings with respect to applied current density is reported. The wear resistance of the coating that exhibited better corrosion resistance was also evaluated.