Microstructural, Mechanical and Corrosion Assessment of Ti-Cu Alloys Prepared by Molten Salt Electro-Deoxidation Process

Titanium-copper alloys with compositions Ti-2.5Cu, Ti-5Cu, and Ti-10Cu were produced from sintered mixed oxides of TiO 2 and CuO, via direct oxide electro-reduction using the Fray-Farthing-Chen (FFC) Cambridge process in molten CaCl 2 at 850 °C. The electro-deoxidation experiments were performed over various time intervals at a cell voltage of 3.1 V between the sintered mixed-oxide cathode and the graphite anode. The reduced products were characterized using X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy techniques to determine the reduction mechanism of the metal oxide mixture. XRD patterns indicated that the Ti-Cu alloys were composed of α-Ti and Ti 2 Cu phases. The presence of the Ti 2 Cu phase became more significant with increasing Cu content in the alloy. Mechanical testing showed an increase in elastic modulus and Vickers hardness as Cu content increased. The corrosion behavior of the alloys was evaluated in 3.5 wt.% NaCl solution at 25°C for 24 h. Potentiodynamic polarization and Electrochemical Impedance Spectroscopy (EIS) studies demonstrated the passivation behavior of the alloys and showed the best corrosion resistance at 5 wt.% Cu concentration.

View article page

Download PDF