Synergistic Role of Ceria and Titania in Enhancing the Microhardness and Corrosion Resistance of Electrodeposited Ni-Ceria-Titania Composite Coating
Electrodeposited composite coatings are of great importance due to their wide range of applications. Among them, electrodeposited Ni-composite coatings are widely studied for wear and corrosion resistance applications. The properties of the composite coatings can be tailored by the filler particles. In the literature, many filler particles like alumina, ceria, titania, zirconia, SiC, Si 3 N 4 , etc., have been explored as the distributive phases in the Ni composite coatings. In the present study, ceria-titania composite powder corresponding to 73 wt% TiO 2 and 27 wt% CeO 2 was used as the distributive phase in the Ni matrix to obtain Ni-TC coating. The effect of particle loading (25 and 100 g/L) on the particle incorporation and microhardness of the Ni composite coating has been studied. The best coating exhibited the highest Knoop hardness of 525 at 50 gF. The optimized Ni-TC coating exhibited improved corrosion resistance compared to plain Ni, Ni-TiO 2 and Ni- CeO 2 coatings reported in the literature. This study proves that titania-ceria composite powders are promising distributive phases for electrodeposited Ni composite coatings to improve the microhardness, corrosion and wear resistance. Further, the titania and ceria powders synergistically contribute to the coating properties.