Selection of Appropriate Welding Process for Joining Nodular Cast Iron through the AHP
Authors
-
Department of Mechanical Engineering, Kalyani Government Engineering College, Kalyani-741235, Dist. Nadia, West Bengal ,IN
Aritra Das -
Department of Mechanical Engineering, Kalyani Government Engineering College, Kalyani-741235, Dist. Nadia, West Bengal ,INSantanu Das
DOI:
https://doi.org/10.24906/isc/2022/v36/i6/220825Keywords:
Welding, Gas Metal Arc Welding, Optimization, Multi Criteria Decision Making, Nodular Cast Iron.Abstract
This work describes application of multi criteria decision making tool for investigation of optimum welding process for Nodular Cast Iron. Factors like bending strength and tensile strength of the welded joint, workability, the efficiency of deposition and economic merit were considered for the selection of the welding process for ductile cast iron. The experimental data were taken from a previous literature. The experimental data and the data calculated from the mathematical model were compared. It was found out that the results obtained from the mathematical model were in good agreement with the experimental data.Downloads
Downloads
Published
How to Cite
Issue
Section
References
E M El-Banna, M S Nageda, M M A El-Saadat, Study of Restoration by Welding of Pearlitic Ductile Cast Iron, Materials Letters, Vol 42, No 5, page 311-320, 2000.
M Pascual, J Cembrero, F Salas, M P MartÃne, Analysis of the Weldability of Ductile Iron, Materials Lettesr, Vol 62, No 8–9, page 1359-1362, 2008.
K Sabiruddin, S Das, A Bhattacharya, Application of the Analytic Hierarchy Process for Optimization of Process Parameters in GMAW, Indian Welding Journal, Vol 42, No 1, page 38-46, 2009.
N Biswas, S Das, Selection of Process Parameters for Welding P91 Steel Pipes Using The Analytic Hierarchy Process, Reason- A Technical Magazine, Vol 10, page 7-12, 2011.
A Al-Faruk, M A Hasib, N Ahmed, Optimization of Process Parameters in MIG Welding using Analytical Hierarchy Process, International Conference on Mechanical Industrial and Energy Engineering, page 23-24, 2010.
A Jayant, M S Dhillon, Use of Analytic Hierarchy Process (AHP) to Select Welding Process in High Pressure Vessel Manufacturing Environment, International Journal of Applied Engineering Research, Vol 10, No 8, page 586-595, 2015.
C Mondal, S Bhattacharya, S Das, Parametric Optimisation of Spot Welding of 17-4 Ph Stainless Steels Using the Analytic Hierarchy Process. Indian Welding Journal, Vol 44, No 4, page 69-77, 2011.
V Ravisankar, V Balasubramanian, C Muralidharan, Selection of Welding Process to Fabricate Butt Joints of High Strength Aluminium Alloys Using Analytic Hierarchic Process, Materials & Design, Vol 27, No 5, page 373-380, 2006.
V Balasubramanian, R Varahamoorthy, C S Ramachandran, C Muralidharan, Selection of Welding Process for Hardfacing on Carbon Steels Based on Quantitative and Qualitative Factors, The International Journal of Advanced Manufacturing Technology, Vol 40, No 9, page 887-897, 2009.
S A Sarkar, J Roy, A Majumder, S C Saha, Optimization of Welding Parameters of Submerged Arc Welding Using Analytic Hierarchy Process (AHP) Based on Taguchi Technique, Journal of The Institution of Engineers (India), Series C 95, No 2, page 159-168, 2014.
S Das, A B Chattopadhyay, Application of the Analytic Hierarchy Process for Estimating the State of Tool Wear, International Journal of Machine Tools and Manufacture, Vol 43, No 1, page 1-6, 2003.
S Bhattacharya, K Sabiruddin, S Das, Optimal Selection of Metal Active Gas Welding Parameters in Joining High Carbon Steel: though the AHP, Indian Science Cruiser, Vol 35, No 5, page 27-36, 2021.
T L Saaty, The Analytic Hierarchy Process, McGraw-Hill, New York, 1980.
H A Donegan, F J Dodd, A Note on Saaty’s Random Indexes, Mathematical and computer modelling, Vol 15, No 10, page 135-137, 1991.
N Fujii, H Honda, A Fukase, K Yasuda, Comparison of Strength Characteristics of Nodular Graphite Cast Iron Welded Joints by Various Welding Processes, Welding International, Vol 21, No 9, page 634-664, 2007.
