-
4
-
3
-
2
-
2
-
2
Volume 51, Issue 3, July 2018
Published:
2018-07-01
Articles
-
Shear Tensile and High Cycle Fatigue Performance of MIG Brazed DP600-GI Steel Sheet Joint
Keywords:
Galvanized Dual Phase Steel, MIG Brazing, Push and Pull Mode, Bead Geometry, Microstructure, High Cycle Fatigue.Abstract views: 0 times|
Download: 0 times|
https://doi.org/10.22486/iwj/2018/v51/i3/175007
-
Microstructure Evolution and Mechanical Properties of Friction Stir Welded Thick HSLA Steel
Keywords:
Friction Stir Welding, High Strength Low Alloy Steel (HSLA), Microstructure, Tensile Properties, Scanning Electron Microscopy.Abstract views: 0 times|
Download: 0 times|
https://doi.org/10.22486/iwj/2018/v51/i3/175006
-
Vacuum Brazing Of Titanium/316L Stainless Steel Transition Joint For Application In Helium Vessel Of Superconducting RF Cavities
Keywords:
Vacuum Brazing, Titanium, Stainless Steel 316L, BVAg8, Superconducting Radiofrequency (SRF) Cavities, Intermetallic Phases.Abstract views: 0 times|
Download: 0 times|
https://doi.org/10.22486/iwj/2018/v51/i3/175005
-
Influence of Heat input on Corrosion Resistance of Duplex Stainless Steel Cladding using Flux Cored Arc Welding on Low Alloy Steel Flats
Keywords:
Cladding, FCAW, Heat Input, Corrosion, Regression Analysis.Abstract views: 0 times|
Download: 0 times|
https://doi.org/10.22486/iwj/2018/v51/i3/175002
-
Theoretical Thermal Model of MIG Welding of FSS (AISI 430) Using ANSYS and its Experimental Verification
Keywords:
Ferritic Stainless Steel, MIG Welding, Cooling Rate, Temperature Distribution, Thermocouple, ANSYS.Abstract views: 0 times|
Download: 0 times|
https://doi.org/10.22486/iwj/2018/v51/i3/175003
-
Air-Cooled Induction Heating Solution for Heat Treatment of P91 Grade Steel in Welding Applications
Keywords:
Post Weld Heat Treatment (PWHT), Programmable Logic Controller (PLC), Self-tuning Controller, Wide Range Induction Heating, Zero Voltage And Near Zero Current Switching (ZVS-N-ZCS).Abstract views: 0 times|
Download: 0 times|
https://doi.org/10.22486/iwj/2018/v51/i3/175004