Study on Opencast Coal Mine Haul Road Dust Suppression using Guargum Grafted Polyacrylamide

Jump To References Section

Authors

  • Department of Mining Engineering, IIT (BHU), Varanasi - 221005, Uttar Pradesh ,IN
  • Department of Mining Engineering, IIT (BHU), Varanasi - 221005, Uttar Pradesh ,IN
  • Department of Chemistry, Institute of Science, Banaras Hindu University, Varanasi - 221005 ,IN

DOI:

https://doi.org/10.18311/jmmf/2022/27744

Keywords:

Dust Suppression, Fugitive Dust, Haul Road, Guargum Grafted Polyacrylamide, Moisture Retention and dust emission

Abstract

Vehicle movement over haul road is the major source of fugitive dust emission from opencast coal mines which adversely affect the environment. Water spraying is the most common practice for controlling fugitive dust generationfrom haul road. In this work, an innovative polymer was synthesised to study its effectiveness as a dust suppressing agent. Guargum grafted polyacrylamide (GG-g-PAM) polymer was synthesised by free radical polymerisation technique using Ceric Ammonium Nitrate (CAN) initiator. Haul road dust sample was collected from a mine and characterised by sieve analysis and Energy Dispersive X-ray (EDX) analysis. An experiment was carried out at controlled environment in the oven to measure the moisture retention efficiency of the dust applying the synthesised polymerat different temperatures 25°C, 35°C and 45°C. For this purpose, 0.1 weight percentage of GG-g-PAM was mixed with water. The solution was sprayed over 20g dust sample (below 10 mesh size) in a petri dish. The same experiment was repeated with only water as the dust suppressant to compare with the effectiveness of GG-g-PAM. The experiments showed that application of GG-g-PAM polymer solution instead of only water helps to increasing moisture retention capacity of haul road dust by 12.9% after 8 h at 25°C, 14.7% after 8 h at 35 °C, and 25.4% after 2 h at 45°C. It is also observed that application of GG-g-PAM polymer solution helped in reducing the dust generation by 36% after 8 h at 25°C, 32% at 35°C after 6 h, and 65% after 2 h at 45 °C. This shows that during scorching summer when the temperature is, in general, above 40°C, GG-g-PAM solution has potential for suppression of haul road dust in opencast coal mines effectively.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2022-07-22

How to Cite

Kumar Kashi, V., Karmakar, N. C., & Krishnamoorthi, S. (2022). Study on Opencast Coal Mine Haul Road Dust Suppression using Guargum Grafted Polyacrylamide. Journal of Mines, Metals and Fuels, 70(5), 242–250. https://doi.org/10.18311/jmmf/2022/27744

Issue

Section

Articles

 

References

Chaulya, S.K., Kumar, A., Mandal, K., Tripathi, N., Singh, R.S., Mishra, P.K., et al. (2011). Assessment of coal mine road dust properties for controlling air pollution. International Journal of Environmental Protection, 1(2): 1-7.

Ghose, M.K. (2002). Air pollution due to opencast coal mining and the characteristics of air-borne dust—An Indian scenario. International Journal of Environmental Studies, 59(2): 211-28. https://doi.org/10.1080/00207230210927 DOI: https://doi.org/10.1080/00207230210927

Kashi, V.K., Karmakar, N.C., & Krishnamoorthi, S. (2020). A critical review of haul road opencast mines fugitve dust- genesis, characteristics and impact. Indian Journal of Enviromental Protection, 40(1): 57-63.

Reed, W.R., & Organiscak, J.A. (2007). Haul road dust control fugitive dust characteristics from surface mine haul roads and methods of control. NIOSH-PR. https://stacks. cdc.gov/view/cdc/8897/cdc_8897_DS1.pdf

Hendryx, M. (2015). The public health impacts of surface coal mining. The Extractive Industries and Society, 2: 820- 826. https://doi.org/10.1016/j.exis.2015.08.006 DOI: https://doi.org/10.1016/j.exis.2015.08.006

Gillies, J.A., Etyemezian, V., Kuhns, H., Nikolic, D., & Gillette, D.A. (2005). Effect of vehicle characteristics on unpaved road dust emissions. Atmospheric Environment, 39(13): 2341-2347. https://doi.org/10.1016/j.atmosenv.2004.05.064 DOI: https://doi.org/10.1016/j.atmosenv.2004.05.064

Foley, G., Cropley, S., & George, G. (1996). Road Dust Control Techniques -Evaluation of Chemical Dust Suppressants Performance. Australian Road Research Board (ARRB). https://trove.nla.gov.au/work/16026369 (Excess on- March 2020)

USEPA- 1987. User’s guide emission control technologies and emission factors for unpaved road fugitive emissions. U.S. Environmental Protection Agency. http://www.lm.doe. gov/cercla/documents/rockyflats_docs/IA/IA-A-003002. PDF

Dixon-Hardy, D.W., Beyhan, S., Ediz, I.G., & Erarslan, K. (2008). The use of oil refinery wastes as a dust suppression surfactant for use in mining. Environmental Engineering Science, 25(8): 1189-1195. https://doi.org/10.1089/ees.2007.0177 DOI: https://doi.org/10.1089/ees.2007.0177

Cecala, A. B., O ’brien, A.D., Schall, J., Colinet, J.F., Fox, W.R., Franta, R.J., Joy, J., et al. (2012). Dust Control Handbook for Industrial Minerals Mining and Processing. https://www.spray.com/pdf/Dust_Control_Hanbook_RI9689.pdf

Omane, D., Liu, W. V., & Pourrahimian, Y. (2018). Comparison of chemical suppressants under different atmospheric temperatures for the control of fugitive dust emission on mine hauls roads. Atmospheric Pollution Research, 9(3): 561-568. https://doi.org/10.1016/j.apr.2017.12.005 DOI: https://doi.org/10.1016/j.apr.2017.12.005

Oodrow, J.A.E.W., Eiber, J.A.N.S., & Iller, G.L.C.M. (2008). Acrylamide release resulting from sunlight irradiation of aqueous polyacrylamide/iron mixtures. Journal of Agricultural and Food Chemistry, 56: 2773-2779. DOI: https://doi.org/10.1021/jf703677v

Wen, Q., Chen, Z., Zhao, Y., Zhang, H., & Feng, Y. (2010). Biodegradation of Polyacrylamide by Bacteria Isolated from Activated Sludge and Oil-Contaminated Soil. Journal of Hazardous Materials, 175: 955-959. https://doi.org/10.1016/j.jhazmat.2009.10.102 DOI: https://doi.org/10.1016/j.jhazmat.2009.10.102

Zou, W., Liu, X., Yu, L., Qiao, D., Chen, L., Liu, H., & Zhang, N. (2013). Synthesis and Characterization of Biodegradable Starch-Polyacrylamide Graft Copolymers Using Starches with Different Microstructures. Journal of Polymers and the Environment, 21(2): 359-365. https://doi.org/10.1007/ s10924-012-0473-y DOI: https://doi.org/10.1007/s10924-012-0473-y

Zhang, H., Nie, W., Wang, H., Bao, Q., Jin, H., & Liu, Y. (2018). Preparation and experimental dust suppression performance characterization of a novel guar gum-modi fi cation-based environmentally-friendly degradable dust suppressant. Powder Technology, 339: 314-325. https://doi.org/10.1016/j.powtec.2018.08.011 DOI: https://doi.org/10.1016/j.powtec.2018.08.011

Thompson, R. J., & Visser, A.T. (2000). The Functional Design of Surface Mine Haul Roads. The Journal of The South African Institute of Mining and Metallurgy, 100(3): 169-180.

Patra, A.K., Gautam, S., & Kumar, P. (2016). Emissions and human health impact of particulate matter from surface mining operation—A review. Environmental Technology and Innovation, 5: 233-249. https://doi.org/10.1016/j. eti.2016.04.002 DOI: https://doi.org/10.1016/j.eti.2016.04.002

ASTM-D6913/D6913M. (2017). Standard test methods for particle-size distribution (gradation) of soils using sieve analysis. ASTM International, 1-34p. https://doi. org/10.1520/D6913_D6913M-17

Adhikary, P., Krishnamoorthi, S., & Singh, R.P. (2011). Synthesis and characterization of grafted carboxymethyl guar gum. Journal of Applied Polymer Science, 120: 2621- 2626. https://doi.org/10.1002/app.33471 DOI: https://doi.org/10.1002/app.33471

ASTM D2216-10. (2010). ASTM D2216-10—Standard test methods for laboratory determination of water (moisture) content of soil and rock by mass. ASTM International, 1-7p. https://doi.org/10.1520/D2216-10.N

Chakraborty, M.K., Ahmad, M., Singh, R.S., Pal, D., Bandopadhyay, C., & Chaulya, S.K. (2002). Determination of the emission rate from various opencast mining operations. Environmental Modelling and Software, 467-80p. https://doi.org/10.1016/S1364-8152(02)00010-5. DOI: https://doi.org/10.1016/S1364-8152(02)00010-5

Kavouras, I. G., Etyemezian, V., Nikolich, G., Gillies, J., Sweeney, M., Young, M., & Shafer, D. (2009). A new technique for characterizing the efficacy of fugitive dust suppressants. Journal of the Air and Waste Management Association, 59(5):603-12p. https://doi.org/10.3155/1047-3289.59.5.603 DOI: https://doi.org/10.3155/1047-3289.59.5.603

Patyukova, E., Rottreau, T., Evans, R., Topham, P.D., & Greenall, M.J. (2018). Hydrogen bonding aggregation in acrylamide: Theory and experiment. Macromolecules, 51:7032-7043. https://doi.org/10.1021/acs.macromol.8b01118. DOI: https://doi.org/10.1021/acs.macromol.8b01118

Sonker, E., Tiwari, R., Adhikary, P., Kumar, K., & Krishnamoorthi, S. (2019). Preparation of ultra?highmolecular? weight polyacrylamide by vertical solution polymerization technique. Polymer Engineering and Science, 59(6): 1-7. https://doi.org/10.1002/pen.25097 DOI: https://doi.org/10.1002/pen.25097