Synthesis of ceramic-based composite

Jump To References Section

Authors

  • ,IN
  • ,IN
  • ,IN
  • ,OM

DOI:

https://doi.org/10.18311/jmmf/2021/28528

Keywords:

Al-TiC, stir casting, reinforcement, composite, metal matrix composite

Abstract

The research paper reports on the processing of titanium carbide (TiC) strengthened aluminium metal matrix composite using a stir casting method. Al 6061 and TiC were used as starting materials for synthesizing Al-1.5TiC composite in a resistance furnace. The stir casting technique was followed owing to its simplicity and economic benefits. Microstructural studies were carried out using image analyser and micrographs revealed even dispersal of reinforcement in the alloy, while energy dispersive spectroscopy (EDS) and x-ray diffraction (XRD) studies confirmed the presence of corresponding elements and phase in the composite.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2021-09-01

How to Cite

Babu Boppana, S., Dayanand, S., Kumar, V., & Kulkarni, M. V. (2021). Synthesis of ceramic-based composite. Journal of Mines, Metals and Fuels, 69(6), 192–196. https://doi.org/10.18311/jmmf/2021/28528

Issue

Section

Articles
Received 2021-09-01
Accepted 2021-09-01
Published 2021-09-01

 

References

Akinlabi, E. T., Mahamood, R. M., Akinlabi, S. A. and Ogunmuyiwa, E. (2014): Processing parameters influence on wear resistance behaviour of friction stir processed Al-TiC composites. Advances in Materials Science and Engineering.

Bauri, R. (2009): Synthesis of Al-TiC in-situ composites: Effect of processing temperature and Ti: C ratio. Transactions of the Indian Institute of Metals, 62(4-5), 391-395.

Bauri, R., Yadav, D., and Suhas, G. (2011): Effect of friction stir processing (FSP) on microstructure and properties of Al–TiC in situ composite. Materials Science and Engineering: A, 528(13-14), 4732-4739.

Bharath, V., Auradi, V., Nagaral, M., and Boppana, S. B. (2020): Experimental Investigations on Mechanical and Wear Behaviour of 2014 Al–Al2O3 Composites. Journal of Bio-and Tribo-Corrosion, 6(2), 1-10.

Boppana, S. B. (2019): In situ synthesis of titanium carbide in pure aluminium. Journal of Materials Science and Chemical Engineering, 8(1), 1-10.

Boppana, S. B. and Chennakeshavalu, K. (2009): Preparation of Al-5Ti master alloys for the in-situ processing of Al-TiC metal matrix composites. Journal of Minerals and Materials Characterization and Engineering, 8(7), 563-568.

Boppana, S. B., and Dayanand, S. (2020): Impact of Heat Treatment on Mechanical, Wear and Corrosion Behaviour of In Situ AlB2 Reinforced Metal Matrix Composites Produced by Liquid Metallurgy Route. Journal of Bio-and Tribo-Corrosion, 6(2), 1-18.

Boppana, S. B., Dayanand, S., Kumar, M. A., Kumar, V. and Aravinda, T. (2020): Synthesis and characterization of nano graphene and ZrO2 reinforced Al 6061 metal matrix composites. Journal of Materials Research and Technology, 9(4), 7354-7362.

Boppana, S. B., Dayanand, S., Murthy, B. V., Nagaral, M., Telagu, A., Kumar, V. and Auradi, V. (2021): Development and Mechanical Characterisation of Al6061-Al2O3-Graphene Hybrid Metal Matrix Composites. Journal of Composites Science, 5(6), 155.

Dayanand, S., Boppana, S. B., Auradi, V., Nagaral, M. and Ravi, M. U. (2021): Evaluation of Wear Properties of Heat-Treated Al-AlB2 in-situ Metal Matrix Composites. Journal of Bio-and Tribo-Corrosion, 7(2), 1-11.

Dayanand, S., Boppana, S. B., Hemanth, J. and Telagu, A. (2019): Microstructure and Corrosion Characteristics of In Situ Aluminum Diboride Metal Matrix Composites. Journal of Bio-and Tribo- Corrosion, 5(3), 1-10.

Kennedy, A. R. and Wyatt, S. M. (2000): The effect of processing on the mechanical properties and interfacial strength of aluminium/TiC MMCs. Composites science and technology, 60(2), 307-314.

Kennedy, A. R., Weston, D. P. and Jones, M. I. (2001): Reaction in Al–TiC metal matrix composites. Materials Science and Engineering: A, 316(1-2), 32-38.

Kumar, V., Nagegowda, K. U., Boppana, S. B., Sengottuvelu, R. and Kayaroganam, P. (2021): Wear behavior of Aluminium 6061 alloy reinforced with coated/uncoated multiwalled carbon nanotube and graphene. Journal of Metals, Materials and Minerals, 31(1).

Liu, W., Cao, C., Xu, J., Wang, X .and Li, X. (2016): Molten salt assisted solidification nano-processing of Al-TiC nano-composites. Materials Letters, 185, 392- 395.

Mohapatra, S., Chaubey, A. K., Mishra, D. K. and Singh, S. K. (2016): Fabrication of Al–TiC composites by hot consolidation technique: its microstructure and mechanical properties. Journal of Materials research and Technology, 5(2), 117-122.

Premkumar, M. K. and Chu, M. G. (1995): AlTiC particulate composite produced by a liquid state in situ process. Materials Science and Engineering: A, 202(1-2), 172-178.

Rao, V. R., Ramanaiah, N. and Sarcar, M. M. M. (2016): Tribological properties of aluminium metal matrix composites (AA7075 reinforced with titanium carbide (TiC) particles). International Journal of Advanced Science and Technology, 88, 13-26.

Raviraj, M. S., Sharanprabhu, C. M. and Mohankumar, G. C. (2014): Experimental analysis on processing and properties of Al-TiC metal matrix composites. Procedia Materials Science, 5, 2032-2038.

Senthilkumar, V., Balaji, A. and Ahamed, H. (2011): Effect of secondary processing and nanoscale reinforcement on the mechanical properties of Al-TiC composites. Journal of Minerals and Materials Characterization and Engineering, 10(14), 1293.

Sheibani, S. and Najafabadi, M. F. (2007): In situ fabrication of Al–TiC metal matrix composites by reactive slag process. Materials & design, 28(8), 2373- 2378.

Shiva, A., Cheepu, M., Kantumuchu, V. C., Kumar, K. R., Venkateswarlu, D., Srinivas, B. and Jerome, S. (2018): Microstructure characterization of Al-TiC surface composite fabricated by friction stir processing. In IOP Conference Series: Materials Science and Engineering, Vol. 330, No. 1, p. 012060). IOP Publishing.

Tong, X. C and Fang, H. S. (1998): Al-TiC composites In Situ-processed by ingot metallurgy and rapid solidification technology: Part I. Microstructural evolution. Metallurgical and Materials Transactions A, 29(3), 875-891.

Wang, Z. J., Qiu, Z. X., Sun, H. Y. and Liu, W. C. (2019). Effect of TiC content on the microstructure, texture and mechanical properties of 1060/Al–TiC/1060 laminated composites. Journal of Alloys and Compounds, 806, 788-797.

Most read articles by the same author(s)