Effect of cenosphere on moisture absorption performance of woven hybrid bamboo-glass fiber reinforced epoxy composites
DOI:
https://doi.org/10.18311/jmmf/2021/30089Keywords:
Bamboo and glass fiber, cenosphere filler, hand lay-up, mechanical properties, moisture absorption.Abstract
This paper presents the moisture absorption behaviour and its influence on mechanical properties of cenosphere filled hybrid bamboo-glass fiber reinforced epoxy composites (BGFRECs). The hand lay-up technique has been adopted with various weight percentages (0.5, 1.0, 1.5, and 2.0) of cenosphere as a filler content. The moisture absorption tests conducted in distilled-water, and saline-water for 10 days at room temperature. With the help of ASTM standards, the moisture absorption and mechanical properties of these composites have been estimated. The tensile and flexural strengths found to increase when filler percentage increases in different environmental treatments. The obtained results revealed that the cenosphere filler loading has a great impact on the moisture absorption and mechanical properties of the hybrid BGFRECs. However, the influence of moisture absorption presented a substantial drop in the mechanical properties of all the hybrid composites.Downloads
Metrics
Downloads
Published
How to Cite
Issue
Section
Accepted 2022-04-27
Published 2022-04-28
References
Du, Y., Wu, T., Yan, N., Kortschot, M. T. and Farnood, R. (2014): Composites Part B, 56, 717–723 https:// doi.org/10.1016/j.compositesb.2013.09.012
Gunge, A., Koppad, P. G., Nagamadhu, M., Kivade, S. B. and Murthy, K.V.S. (2019): Composites Communications,13,47–51. https://doi.org/https:// doi.org/10.1016/j.coco.2019.02.006
Prashanth, K.P., Hanumantharaju, H.G. and Lokesh, G.N. (2019). AIP Conference Proceedings, 2057(1)020022. https://doi.org/10.1063/1.5085593
Ramesh Kumar, S.C., Shivanand, H.K., Vidayasagar, H.N. and Nagabhushan V. (2018): AIP Conference Proceedings 1943 020115,1-6. https://doi.org/10.1063/ 1.5029691
Nath, S., Jena, H., Priyanka and Sahini, D. (2019): Silicon, 11(2), 659–671. https://doi.org/10.1007/s12633- 018-9941-x
Venkatesha, B. K. and Saravanan, R. (2020): International Journal of Vehicle Structures and Systems, 12(4), 447–451. https://doi.org/10.4273/ ijvss.12.4.18
Pichor, W. (2009): Brittle Matrix Composites.9,245-254. https://doi.org/10.1533/9781845697754.245.
Jena, H., Pradhan, A. K., and Pandit, M. K. (2014): Journal of Reinforced Plastics and Composites, 33(11), 1059–1068. https://doi.org/10.1177/ 0731684414523325
Dalbehera, S. and Acharya, S.K. (2016): Advances in Polymer Technology, 37(1). https://doi.org/10.1002/ adv.21662
Bheemappa, S., Chandramohan, G., Hatna, S. and Jayaraju, T. (2008): Polymer Composites,29(3), 307–312 https://doi.org/10.1002/pc.20380
Pradeep, K. K. and Kumar, R. (2009): Polymer-Plastics Technology and Engineering, 49, 45–52. https:// doi.org/10.1080/03602550903283026
Zamri, M. H., Akil, H. M., Bakar, A. A., Ishak, Z. A. M. and Cheng, L. W. (2011). Journal of Composite Materials, 46(1), 51–61.https://doi.org/10.1177/ 0021998311410488
Naik, L. L., Gopalakrishna, K. and Yogesha, B. (2016): American Journal of Materials Science, 6(4), 91–94. https://doi.org/10.5923/j.materials.20160604.02
Bharadiya, P. S., Singh, M. K. and Mishra, S. (2019): Journal of Mines Metals and Fuels, 71(2), 838–843. https://doi.org/10.1007/s11837-018-3239-8
Latha, P. S. and Rao, M. V. (2018): Silicon, 10(4), 1543– 1550. https://doi.org/10.1007/s12633-017-9637-7
Venkatesha, B. K., Saravanan R and Anand Babu, K. (2021): Materials Today Proceedings, 45(part1), 216- 221. https://doi.org/10.1016/j.matpr.2020.10.421
Gamstedt, E. K. (2016): IOP Conference Series: Materials Science and Engineering, 139(1).https:// doi.org/10.1088/1757-899X/139/1/012003
Venkatesha, B. K., Pramod Kumar, S. K., Saravanan, R. and Ishak, A. (2020): IOP Conference Series: Materials Science and Engineering,1003 012018. https://doi.org/ 10.1088/1757-899x/1003/1/012087
Syaqira S, S. N., Leman, Z., Sapuan, S. M., Dele- Afolabi, T. T., Azmah Hanim, M. A. and Budati, S. (2020): Polymers, 12(9). https://doi.org/10.3390/ POLYM12091923
Mishra, C., Ranjan Deo, C. and Baskey, S. (2020): Materials Today: Proceedings, 38 (part 5), 2596-2600. https://doi.org /10.1016/j.matpr.2020.08.100
Raghavendra Rao R, S. Pradeep, C.K. Yogish, Nikhil R., Geetanjali Patil. (2019): Journal of Polymer & Composites. 7(3), 8–19. https://doi.org/10.37591/ jopc.v7i3.3441