Oxidation performance of CNT-reinforced Cr3C2-NiCr coatings sprayed by HVOF method

Jump To References Section

Authors

  • ,IN
  • ,IN
  • ,IN

DOI:

https://doi.org/10.18311/jmmf/2021/30106

Keywords:

High velocity oxy-fuel (HVOF), carbon nanotube (CNT), oxidation, boiler tube alloy steel, thermogravimetric analysis, elevated temperature.

Abstract

The high-temperature oxidation performance of thermal sprayed nanocomposite coatings is discussed in the present study. The three combinations 3, 5, and 7% wt. of CNT reinforced Cr3C2-25% NiC coatings sprayed by HVOF on SAE-213 T12 boiler tube alloy steel working at 6000C in silicon tubular furnace following 1hour heating and 20 minutes cooling in atmospheric temperature for 50 cycles. Thermally developed oxidized layer formation influences in structural variations on surface morphology, phases of elements of uncoated and CNT coated sample were analysed using SEM/EDS and XRD techniques. The thermogravimetric approach was used to estimate the kinetics of oxidation on all samples the weight gain measurement has been studied. The weight accumulation of bare substrate has a higher rate of oxidation than the CNT coated samples. The weight gain of the samples oxidation mechanism generally represents parabolic in nature. The oxidation growth rate minimizes when CNT reinforced in coatings and oxidizing scale deposited on CNT coated surface significantly lower than uncoated samples. The developed Cr2O3, NiO, and Fe2O3 oxidized layers were provided intensifying oxidation resistance.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2022-04-28

How to Cite

K, M., G, G., & N, J. (2022). Oxidation performance of CNT-reinforced Cr<sub>3</sub>C<sub>2</sub>-NiCr coatings sprayed by HVOF method. Journal of Mines, Metals and Fuels, 69(12A), 214–223. https://doi.org/10.18311/jmmf/2021/30106
Received 2022-04-28
Accepted 2022-04-28
Published 2022-04-28

 

References

Thakare, J. G., Mulik, R. S. and Mahapatra, M. M. (2018): Effect of carbon nanotubes and aluminum oxide on the properties of a plasma sprayed thermal barrier coating. Ceramics International, 44(1),438451.doi.10.1016/j.ceramint. 2017.09.196

Jalal, Z., Al-Sultani, K. F. and Majdi, H. S. (2021): MWCNTs Addition to Al2O3-SiC Binary Coating Deposited by Plasma Thermal Spray on Low Carbon Steel Substrate. IOP Conference Series: Materials Science and Engineering, 1094(1), 012158. doi.10.1088/ 1757-899x/1094/1/012158

Somasundaram, B., Kadoli, R. and Ramesh, M. R. (2014): Evaluation of cyclic oxidation and hot corrosion behaviour of HVOF-sprayed WC-Co/NiCrAlY coating. Journal of Thermal Spray Technology, 23(6), 1000–1008. doi.10.1007/s11666-0140112-3

Somasundaram. B., Kadoli, R., Ramesh, M. R. and Ramesh, C. S. (2015): Evaluation of Thermocyclic Oxidation Behaviour of HVOF Sprayed WC-CrC-Ni Coatings. Bonfring International Journal of Industrial Engineering and Management Science, 5(2), 83–89. doi.10.9756/bijiems.10413

Crabos, F., Viguier, B., Goti, R., Hourcastagné, E. and Bétaille-Francoual, M. (2013): Isothermal Oxidation Behaviour of NiCoCrAlYTa Coatings Produced by HVOF Spraying and TribometTM Process. Oxidation of Metals, 81(1–2), 105–113.doi.10.1007/s11085-0139422-y

Goyal, R., Sidhu, B. S. and Chawla, V. (2018): Improving the high-temperature oxidation resistance of ASMESA213T11 boiler tube steel by plasma spraying with CNT-reinforced alumina coatings. Anti-Corrosion Methods and Materials, 65(2), 217–223. doi.10.1108/ ACMM-03-2017-1778

Bala, N., Singh, H. and Prakash, S. (2009): Hightemperature oxidation studies of cold-sprayed Ni-20Cr and Ni-50Cr coatings on SAE 213-T22 boiler steel. Applied Surface Science, 255(15), 6862–6869. doi.10.1016/j.apsusc.2009.03.006

Cai, Z., Wu, Y., Liu, H., Tian, G., Pu, R., Piao, S. Xiao, L. (2018): Formation and oxidation resistance of a new YSZ modified silicide coating on Mo-based alloy. Materials and Design, 155, 463–474.doi.10.1016/ j.matdes. 2018.06.011

Hatami, M., Naeimi, F., Shamanian, M. and Tahari, M. (2018): High-Temperature Oxidation Behaviour of Nanostructured CoNiCrAlY–YSZ Coatings Produced by HVOF Thermal Spray Technique. Oxidation of Metals, 90(1–2), 153–167. doi.10.1007/s11085-017-9829-y

Jegadeeswaran, N., Bhat, K. U. and Ramesh, M. R. (2013). Oxidation Studies on As-received and HVOF Sprayed Stellite-6 Coating on Turbine Alloys at 800oC. International Journal of Scientific & Engineering Research, 4(6), 214–220. Retrieved from http://www.ijser.org

Kusumoto, K., Shimizu, K., Yaer, X., Hara, H., Tamura, K. and Kawai, H. (2015): High erosion-oxidation performance of Fe-based Nb or V containing multicomponent alloys with Co addition at 1173 K. Materials and Design, 88, 366–374. doi.10.1016/j.matdes.2015.08.161

Mohammadi, M., Javadpour, S., Jahromi, S. A. J. and Kobayashi, A. (2016): Cyclic Oxidation and Hot Corrosion Behaviours of Gradient CoNiCrAlYSi Coatings Produced by HVOF and Diffusional Processes. Oxidation of Metals, 86(3–4), 221– 238.doi.10.1007/s11085-016-9633-0

Naeimi, F., Rahimipour, M. R. and Salehi, M. (2016): Effect of Sandblasting Process on the Oxidation Behaviour of HVOF MCrAlY Coatings. Oxidation of Metals, 86(1–2), 59–73. doi.10.1007/s11085-016-9619-y

Ramesh, M. R., Prakash, S., Nath, S. K., Sapra, P. K. and Krishnamurthy, N. (2011): Evaluation of thermocyclic oxidation behaviour of HVOF-sprayed NiCrFeSiB coatings on boiler tube steels. Journal of Thermal Spray Technology, 20(5), 992– 1000.doi.10.1007/s11666-010-9605-x

Rana, N., Jayaganthan, R. and Prakash, S. (2014). Stepwise oxidation mechanism of HVOF sprayed NiCrAlY coatings in air. Transactions of the Indian Institute of Metals, 67(3), 393–400. doi.10.1007/s12666013-0362-7

Reddy, N. C., Kumar, B. S. A., Reddappa, H. N., Ramesh, M. R., Koppad, P. G. and Kord, S. (2018): HVOF sprayedNi3TiandNi3Ti+(Cr3C2+20NiCr) coatings: Microstructure, microhardness and oxidation behaviour. Journal of Alloys and Compounds, 736, 236–245.

Houdková, Š., Èesánek, Z., Smazalová, E. and Lukáè, F. (2018): The High-Temperature Wear and Oxidation Behaviour of CrC-Based HVOF Coatings. Journal of Thermal Spray Technology, 27(1–2), 179–195. doi.10.1007/s11666-017-0637-3

Shamsipoor, A., Farvizi, M., Razavi, M., Keyvani, A., Mousavi, B. and Pan, W. (2020): High-temperature oxidation behaviour in YSZ coated Cr2AlC and CoNiCrAlY substrates. Surface and Coatings Technology, 401 (July), 126239.

Ariharan, S., Hazra, M. and Balani, K. (2018). Hightemperature oxidation of graphite. Nanomaterials and Energy, 7(2), 37–43. doi.10.1680/jnaen.18.00008

Chen, H., Fan, M., Zhu, W. and Norton, A. D. (2020): High temperature oxidation behaviour of combustion flame sprayed CoNiCrAlY coatings. Surface and Coatings Technology, 385 (February), 125431.

doi.10.1016/j.surfcoat.2020.125431

Richer, P., Yandouzi, M., Beauvais, L. and Jodoin, B. (2010): Oxidation behaviour of CoNiCrAlY bond coats produced by plasma, HVOF and cold gas dynamic spraying. Surface and Coatings Technology, 204(24), JOURNAL OF MINES, METALS & FUELS 223 3962–3974. doi.10.1016/j.surfcoat.2010.03.043

Kumar, R., Tewari, V. K. and Prakash, S. (2019): Oxidation Behaviour of Welded ASTM-SA210 GrA1 Boiler Tube Steels under Cyclic Conditions at 900°C in Air. High Temperature Materials and Processes, 38(2019), 326–331. https://doi.org/10.1515/htmp-20180017

Mahesh, R. A., Jayaganthan, R. and Prakash, S. (2008): Oxidation behaviour of selected Ni- And Fe- based superalloys in air at 900°C under cyclic conditions. Transactions of the Indian Institute of Metals, 61(1), 45–49. doi.10.1007/s12666-008-0064-8

Kaur, N., Kumar, M., Sharma, S. K., Kim, D. Y., Kumar, S., Chavan, N. M., Singh, H. (2015): Study of mechanical properties and high temperature oxidation behaviour of a novel cold-spray Ni-20Cr coating on boiler steels. Applied Surface Science, 328, 13–25. doi.10.1016/j.apsusc.2014.12.033

LOTFI, B. (2010): Elevated temperature oxidation behaviour of HVOF sprayed TiB2 cermet coating.

Transactions of Nonferrous Metals Society of China (English Edition), 20(2), 243–247. doi.10.1016/S1003-6326(09)60129-1

Kamal, S., Jayaganthan, R. and Prakash, S. (2010): High temperature cyclic oxidation and hot corrosion

behaviours of superalloys at 900°C. Bulletin of Materials Science, 33(3), 299–306. doi.10.1007/s12034-010-0046-4

Saladi, S., Menghani, J. and Prakash, S. (2014): A Study on the Cyclic Oxidation Behaviour of Detonation-Gun-Sprayed Ni-5Al Coatings on Inconel-718 at 900°C, 23(December),4394–4403. doi.10.1007/s11665-014-1240-0

Meharwal, A., Kumar, M., Karak, S. K., Majumdar, J. D. and Manna, I. (2020): High Temperature Oxidation Study of Nano-Y2O3 Dispersed Ferritic Alloys Synthesized by Mechanical Alloying and Sintering. Metallurgical and Materials Transactions.doi.10.1007/s11661-020-05918-7

Bao, Z., Han, R., Zhu, Y., Li, N. and Zhang, C. (2021): Study on High Temperature Oxidation Properties of Molybdenum-based Alloys Study on High Temperature Oxidation Properties of Molybdenumbased Alloys. doi.10.1088/1742-6596/1789/1/012002

Kumar, A., Vivek Srivastav and N K Mishra (2018): Oxidation resistance of uncoated and detonation - gun sprayed WC-12Co and Ni-20Cr coatings on TOxidation resistance of uncoated & detonation-gun sprayed WC-12Co and Ni-20Cr coatings on T-22 boiler steel at 900°C.